https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406986#M7312 Andrew,<BR /><BR />Install netraid assistant. You can install it off the navigator cd. Close out the autoplay and then browse to \netraid\NT\US and then run setup. Goto NT folder regardless of NT or 2000. Then you can add hdds to the array. <BR /><BR />Ciao,<BR />Greg Mon, 25 Oct 2004 11:54:58 GMT Greg Carlson 2004-10-25T11:54:58Z https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406983#M7309 I have the Netserver Navigator software that came with my netserver lh4r - the problem is that the maximum partition size it will let me install my NOS is 2 GB - is there updated software to allow me to create a bigger partition for my NOS? Mon, 25 Oct 2004 07:44:53 GMT https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406983#M7309 Andrew_271 2004-10-25T07:44:53Z https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406984#M7310 Andrew,<BR /><BR />Do a manual install, the automated install will limit you to 2gb for an install. Make sure that when you do a manual install that you hit F6 to load third party drivers for the netraid controller, otherwise the install will not find the hdds. Then you can create a larger OS partition. <BR /><BR />Ciao,<BR />Greg Mon, 25 Oct 2004 10:03:17 GMT https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406984#M7310 Greg Carlson 2004-10-25T10:03:17Z https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406985#M7311 Greg - <BR /><BR />Thanks for the response. That is what I did - how do i know (after i install windows) that the raid is configured properly? Is there a RAID configuration utility I can run from windows? I have 2 more drives to install, and I want to manually configure the raid settings...<BR /><BR />Andrew Mon, 25 Oct 2004 10:08:32 GMT https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406985#M7311 Andrew_271 2004-10-25T10:08:32Z https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406986#M7312 Andrew,<BR /><BR />Install netraid assistant. You can install it off the navigator cd. Close out the autoplay and then browse to \netraid\NT\US and then run setup. Goto NT folder regardless of NT or 2000. Then you can add hdds to the array. <BR /><BR />Ciao,<BR />Greg Mon, 25 Oct 2004 11:54:58 GMT https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406986#M7312 Greg Carlson 2004-10-25T11:54:58Z https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406987#M7313 Andrew,<BR /><BR />Actually I would download the latest netraid assist and monitor utility. The monitor utility will run scheduled consistency checks to keep your raidset healthy.<BR /><BR />You can download the netraid assist and monitor here: <A href="http://tinyurl.com/4djom" target="_blank">http://tinyurl.com/4djom</A><BR /><BR />Its the same version of netraid assist and monitor. <BR /><BR />Thanks and if this helps, points are always appreciated. :)<BR /><BR />Greg Mon, 25 Oct 2004 12:12:06 GMT https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406987#M7313 Greg Carlson 2004-10-25T12:12:06Z https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406988#M7314 Thank you very much for the help. Mon, 25 Oct 2004 12:14:21 GMT https://community.hpe.com/t5/netservers/updated-software-for-netserver-lh4r/m-p/3406988#M7314 Andrew_271 2004-10-25T12:14:21Z