https://community.hpe.com/t5/netservers/fan-emergency/m-p/3426046#M7379 Remco,<BR /><BR />The LP1000r was a complete chassis replacement for anything other than a CPU, memory or hard drive failure. If you have a fan failure in the server, you should have a red LED on the front of the LP1000. Call in for support.<BR /><BR />Ciao,<BR />Greg Fri, 19 Nov 2004 08:56:40 GMT Greg Carlson 2004-11-19T08:56:40Z https://community.hpe.com/t5/netservers/fan-emergency/m-p/3426045#M7378 Fan sensor [CPU Fan No 1] crossed the lower critical threshold. <BR /><BR />This error is reported by server agents. Any clues? The netserver lp 1000r is already running latest FW 04.16.31 RA. <BR /><BR />Help? Fri, 19 Nov 2004 07:00:20 GMT https://community.hpe.com/t5/netservers/fan-emergency/m-p/3426045#M7378 remco_10 2004-11-19T07:00:20Z https://community.hpe.com/t5/netservers/fan-emergency/m-p/3426046#M7379 Remco,<BR /><BR />The LP1000r was a complete chassis replacement for anything other than a CPU, memory or hard drive failure. If you have a fan failure in the server, you should have a red LED on the front of the LP1000. Call in for support.<BR /><BR />Ciao,<BR />Greg Fri, 19 Nov 2004 08:56:40 GMT https://community.hpe.com/t5/netservers/fan-emergency/m-p/3426046#M7379 Greg Carlson 2004-11-19T08:56:40Z