https://community.hpe.com/t5/netservers/hp-netserver-lh-6000-issues-with-kvm/m-p/3453027#M7523 Hello Greg,<BR />This "focus" issue has been seen with some Netservers and Belkin KVM switches. Unfortunately a fix was never found. Netservers will work properly with some KVM switches, but there is apparently a communication problem with at least some of the Belkin KVMs. Tue, 18 Jan 2005 08:53:16 GMT Terri Harris 2005-01-18T08:53:16Z https://community.hpe.com/t5/netservers/hp-netserver-lh-6000-issues-with-kvm/m-p/3453026#M7522 I have two HP NetServer LH 6000's and they are connected to a Belkin 16 port KVM. Only one is in production so i can test with the other. The production server is having an issue during any reboot - If the KVM focus is not on the server, it will go through a proper shutdown then it seems to just sit. When KVM focus is changed to the server the server will load up BIOS and boot normally. If a reboot is issued with KVM focus on the server and left on the server it will reboot normally.<BR /><BR />Does the NetServer not function with KVM? Thu, 30 Dec 2004 14:32:19 GMT https://community.hpe.com/t5/netservers/hp-netserver-lh-6000-issues-with-kvm/m-p/3453026#M7522 Greg Deola 2004-12-30T14:32:19Z https://community.hpe.com/t5/netservers/hp-netserver-lh-6000-issues-with-kvm/m-p/3453027#M7523 Hello Greg,<BR />This "focus" issue has been seen with some Netservers and Belkin KVM switches. Unfortunately a fix was never found. Netservers will work properly with some KVM switches, but there is apparently a communication problem with at least some of the Belkin KVMs. Tue, 18 Jan 2005 08:53:16 GMT https://community.hpe.com/t5/netservers/hp-netserver-lh-6000-issues-with-kvm/m-p/3453027#M7523 Terri Harris 2005-01-18T08:53:16Z https://community.hpe.com/t5/netservers/hp-netserver-lh-6000-issues-with-kvm/m-p/3453028#M7524 I have never got Belkin KVM's to function<BR />with more than 2 Hp Netservers or Dl380's.<BR />Not even their enterprise KVM's.<BR />I once hooked two KVM's in series to buffer<BR />Video because when a third video source<BR />from a netserver or a DL was plugged in<BR />it killed the video from the other two<BR />servers. When only using two servers I can<BR />force the KVM's to function by Powering down, removing the line cord's and wating 30 seconds and plugging them back in and cold booting. However, the scroll lock<BR />key (used for selecting input) and num lock<BR />keys are very sluggish.(about 2 second delay). The remote user (terminal services)<BR />works good on win2k server and win2003 server. I need to use KVM's because our security software (network Client / server security for computers in domain) prevents itself from being used from terminal services and the icons in the tray or the programs do not show up.<BR /><BR />Does any one know a 4 port KVM switch that<BR />works with Netserver and DL servers? Sat, 19 Feb 2005 14:55:35 GMT https://community.hpe.com/t5/netservers/hp-netserver-lh-6000-issues-with-kvm/m-p/3453028#M7524 LisaC_1 2005-02-19T14:55:35Z