https://community.hpe.com/t5/netservers/netserver-agents-1005cpu/m-p/3554274#M7975 Hi Eduard,<BR /><BR />have a look at the hardware log (SEL) and see if it is not filled up 100%, if it is, clear it and check again (stop/start SNMP also)<BR /><BR />As a side note, Windows 2003 is not officially supported on the LH3.<BR /><BR /><BR />Kris<BR /> Tue, 31 May 2005 08:32:33 GMT kris rombauts 2005-05-31T08:32:33Z https://community.hpe.com/t5/netservers/netserver-agents-1005cpu/m-p/3554273#M7974 Does anyone know why the HP NetServer Agents (version 5.5) consume 100% CPU. The TopTools server is running idle, and only a few servers experience the problem. Thanks<BR /><BR />Servers: Netserver LH 3<BR />OS: Windows 2003 Mon, 30 May 2005 07:01:39 GMT https://community.hpe.com/t5/netservers/netserver-agents-1005cpu/m-p/3554273#M7974 eduard_7 2005-05-30T07:01:39Z https://community.hpe.com/t5/netservers/netserver-agents-1005cpu/m-p/3554274#M7975 Hi Eduard,<BR /><BR />have a look at the hardware log (SEL) and see if it is not filled up 100%, if it is, clear it and check again (stop/start SNMP also)<BR /><BR />As a side note, Windows 2003 is not officially supported on the LH3.<BR /><BR /><BR />Kris<BR /> Tue, 31 May 2005 08:32:33 GMT https://community.hpe.com/t5/netservers/netserver-agents-1005cpu/m-p/3554274#M7975 kris rombauts 2005-05-31T08:32:33Z https://community.hpe.com/t5/netservers/netserver-agents-1005cpu/m-p/3554275#M7976 Thanks Kris,<BR /><BR />ASR service was stopped anb BIOS was updated. Now server runs OK.<BR /><BR /> Wed, 01 Jun 2005 09:40:25 GMT https://community.hpe.com/t5/netservers/netserver-agents-1005cpu/m-p/3554275#M7976 eduard_7 2005-06-01T09:40:25Z