https://community.hpe.com/t5/netservers/netserver-change-hdd/m-p/3570169#M8010 Hi, thanks a lot für the quick answer - I'll take this way as soon as possible. Herw Mon, 27 Jun 2005 07:37:35 GMT HeKi 2005-06-27T07:37:35Z https://community.hpe.com/t5/netservers/netserver-change-hdd/m-p/3570167#M8008 We are using one LC2000 with Raid-5(1si) on NT4.0, including three good-running but very small 9GB-HDDs. We now want to change to three 36GB-HDDs. Is there any possibility to change the drives using swapping drive-by-drive, without re-installing the OS and without loosing any space on the new drives? Any suggestions please? Thanks a lot in advance! Herwig Fri, 24 Jun 2005 08:10:45 GMT https://community.hpe.com/t5/netservers/netserver-change-hdd/m-p/3570167#M8008 HeKi 2005-06-24T08:10:45Z https://community.hpe.com/t5/netservers/netserver-change-hdd/m-p/3570168#M8009 Hi,<BR /><BR />Take an image of partitions (partition to file method) with norton ghost or something, take out old disk and put new ones, make raid configuration, install a clean OS and make partitions just like the old ones, then restore images over newly installed OS. Sat, 25 Jun 2005 12:34:14 GMT https://community.hpe.com/t5/netservers/netserver-change-hdd/m-p/3570168#M8009 Oguz Kutlu Asik 2005-06-25T12:34:14Z https://community.hpe.com/t5/netservers/netserver-change-hdd/m-p/3570169#M8010 Hi, thanks a lot für the quick answer - I'll take this way as soon as possible. Herw Mon, 27 Jun 2005 07:37:35 GMT https://community.hpe.com/t5/netservers/netserver-change-hdd/m-p/3570169#M8010 HeKi 2005-06-27T07:37:35Z