topic Re: Second SCSI onboard controller in Netservers

Second SCSI onboard controller

Marcelo Galeti — Thu, 07 Jul 2005 09:01:29 GMT

Hello Guys,

I have a LC2000 with a NetRaid-1Si. In this NetRaid card I have 6 HotSwap disks.

I had a look inside the LC2000 box and I saw 2 SCSI channel (named A and B).

Can I use this channel to connect one Internal SCSI disk ? I would like to use a internal disk to not so important files .. swap area and other.

Re: Second SCSI onboard controller

kris rombauts — Fri, 08 Jul 2005 06:55:55 GMT

Hi Marcelo,

yes you can, it can be used for SCSI disk drives or tape drives, cdrom etc.

It's just a simple (non raid capable) SCSI controller type: Symbios Logic 896 22910 which you can configure if needed at bootup when it displays it BIOS message and press the function key to enter the BIOS config utility.

HTH

Kris