netserver e60 error beep code

Ahmed Hassan_1 — Mon, 26 Nov 2001 07:29:29 GMT

I have an error beep code 1-3-3-1 in hp net server e60; any body know what is this error means or where I can find out a definition to this error?

ahmed

Re: netserver e60 error beep code

Marino Meloni_1 — Mon, 26 Nov 2001 10:36:41 GMT

hi
try here

http://netserver.hp.com/support/parts_service/beep_codes/beep_codes_tpl.asp?pid=E60

P = Check and replace processor
S = Check and replace system board
M = Check and replace memory modules
V = Check video configuration (two video boards installed or no video enabled)
R = Attempt update of ROM BIOS, then replace system board

Beep Code Test Failure I/O port 80H Repair
1-2-2-3 BIOS ROM checksum 16 R
1-3-1-1 Test DRAM refresh 20 S
1-3-1-3 Test 8742 Keyboard Controller 22 S
1-3-4-1 Test 64K base address lines 2C M, S
1-3-4-3 Test 64K base memory 2E M, S
1-4-1-1 Test 64K base memory (upper 16 bits) 30 M, S
2-1-2-3 Copyright checksum 46 R
2-2-3-1 Test for unexpected interrupts 58 S
1-2 Search for option ROMs. One long, two short beeps on checksum failure 98 S
1 One short beep before boot. B4 S

Re: netserver e60 error beep code

Marcin Golembski_1 — Mon, 26 Nov 2001 10:48:39 GMT

1-3-3-1 usually means a memory problem (don't now why it's not on the list above), so check and/or replace memory modules.

topic Re: netserver e60 error beep code in Netservers

netserver e60 error beep code

Re: netserver e60 error beep code

Re: netserver e60 error beep code