https://community.hpe.com/t5/netservers/lt6000r-u3-netraid-question/m-p/3796832#M8909 When I went into the SCSI Utility (ctrl -m)<BR />and I saw that I have SCSI-3 options in the settings. DO I have the 3Si SCSI raid in there?<BR />IS there a way to disable Channel 1 instead of scanning all of the channel at bootup?<BR />How do I disable the press any key to continue message at the startup Tue, 30 May 2006 09:59:31 GMT slyandjen 2006-05-30T09:59:31Z https://community.hpe.com/t5/netservers/lt6000r-u3-netraid-question/m-p/3796832#M8909 When I went into the SCSI Utility (ctrl -m)<BR />and I saw that I have SCSI-3 options in the settings. DO I have the 3Si SCSI raid in there?<BR />IS there a way to disable Channel 1 instead of scanning all of the channel at bootup?<BR />How do I disable the press any key to continue message at the startup Tue, 30 May 2006 09:59:31 GMT https://community.hpe.com/t5/netservers/lt6000r-u3-netraid-question/m-p/3796832#M8909 slyandjen 2006-05-30T09:59:31Z https://community.hpe.com/t5/netservers/lt6000r-u3-netraid-question/m-p/3796833#M8910 Hello,<BR /><BR />I have a LH6000R U3 and there you decide in the BIOS which channel is RAID and which is Standard SCSI-3.<BR />Because I only use the RAID controller I'am not really familiar with the rest. But my LH4 starts a different SCSI BIOS if one of the Channels is not controlled by the raid controller. And there it should be possible to disable the channel.<BR />Only if the configuration of the RAID controller and the real disk configuration are different this message appears. So, change the RAID configuration for your needs. <BR />More help could be given if you would tell us the complete message. There must be more information why it stops booting. A missing disk, a disk that has roamed, moved to another slot, or something like that. Wed, 31 May 2006 02:55:57 GMT https://community.hpe.com/t5/netservers/lt6000r-u3-netraid-question/m-p/3796833#M8910 Hans-Jürgen Lange 2006-05-31T02:55:57Z