topic LC2000 in Netservers

LC2000

Matteo Feliciani — Wed, 16 Aug 2006 15:03:03 GMT

My Lc2000 immediatly stops when I switch on.
The server emits the beep code 1-3-3-1.
I tried to change the DRAM with a working one but nothing change.
What else can i try?
Inside the server i can see 8 leds, 2 of that remains light. Somebody know a link to understand what does they mean?

Re: LC2000

e4services — Thu, 17 Aug 2006 07:51:36 GMT

That is a DRAM Test Failure per the Beep Code. Try a deferent DRAM slot since you already swapped out the DRAM itself.
Try removing and reinserting everything, CPU, VRM, PCI cards etc.

Re: LC2000

Sean T. Craig — Sun, 27 Aug 2006 08:40:29 GMT

Hi Matteo,

Yes, this is a RAM failure. This is the same code you get when there's no RAM in the server. Make sure you have the correct supported RAM for this server and try a single stick in one slot and then another. If you are sure the RAM works and it is supported in this server, but still doesn't work, then the system board will need to be replaced.

Hope this helps,

Sean T. Craig Sr. C.E.T., M.C.P.