https://community.hpe.com/t5/netservers/netserver-e60-unable-to-boot-windows-2003-bootable-cd/m-p/3903334#M9188 Hi,<BR /><BR />Someone helped me find the solution. It was a simple thing, but unfortunately I have little experience:<BR /><BR />The problem was that the original CD drive didn't work, and I realized it too late. I put it in another PC and it was recognized, but can't read any CD.<BR /><BR />I couldn't boot with the CD drive that I replaced it with because I forgot to set the jumper to cable select and it was not recognized by the bios.<BR /><BR />I changed the jumper setting and now it's booting fine.<BR /><BR />Akos<BR /><BR /> Thu, 23 Nov 2006 22:49:16 GMT Akos Toth 2006-11-23T22:49:16Z https://community.hpe.com/t5/netservers/netserver-e60-unable-to-boot-windows-2003-bootable-cd/m-p/3903333#M9187 Hi,<BR /><BR />I'm new to servers. I'd like to install Windows 2003 on the above server (400Mhz single CPU). Previously WinNT server was installed, so I started by formatting all hard drives. Then in Bios I've set CDROM to be the first booting device, but after every restart I always get the error message 'operating system not found'.<BR /><BR />I've tried these:<BR />1) made sure the CD is bootable by inserting it in another computer<BR />2) changed the CD-rom drive in the server<BR />3) booted from Win98 boot floppy disk with CD-rom support and I could open the CD and see the files on it.<BR /><BR />What am I doing wrong?<BR />Thank you for any suggestion.<BR /><BR />Akos Thu, 23 Nov 2006 09:41:02 GMT https://community.hpe.com/t5/netservers/netserver-e60-unable-to-boot-windows-2003-bootable-cd/m-p/3903333#M9187 Akos Toth 2006-11-23T09:41:02Z https://community.hpe.com/t5/netservers/netserver-e60-unable-to-boot-windows-2003-bootable-cd/m-p/3903334#M9188 Hi,<BR /><BR />Someone helped me find the solution. It was a simple thing, but unfortunately I have little experience:<BR /><BR />The problem was that the original CD drive didn't work, and I realized it too late. I put it in another PC and it was recognized, but can't read any CD.<BR /><BR />I couldn't boot with the CD drive that I replaced it with because I forgot to set the jumper to cable select and it was not recognized by the bios.<BR /><BR />I changed the jumper setting and now it's booting fine.<BR /><BR />Akos<BR /><BR /> Thu, 23 Nov 2006 22:49:16 GMT https://community.hpe.com/t5/netservers/netserver-e60-unable-to-boot-windows-2003-bootable-cd/m-p/3903334#M9188 Akos Toth 2006-11-23T22:49:16Z