https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917323#M9239 hmm, I was affraid that it's so ... Fri, 29 Dec 2006 11:35:38 GMT Kuko Kukovic 2006-12-29T11:35:38Z https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917319#M9235 currently dual P3 933MHz, would it work with two p3 1.4GHz tualatins ? Sun, 24 Dec 2006 12:03:33 GMT https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917319#M9235 Kuko Kukovic 2006-12-24T12:03:33Z https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917320#M9236 No. That cpu requires different chipset. The Slot 1 P# came only up to 1GHz, with the 933 the only one made in large volume Mon, 25 Dec 2006 12:29:48 GMT https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917320#M9236 e4services 2006-12-25T12:29:48Z https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917321#M9237 it is not slot 1 motherboard, it is slot 370 or something, do you want me to send you a picture of motherboard ? Tue, 26 Dec 2006 21:28:35 GMT https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917321#M9237 Kuko Kukovic 2006-12-26T21:28:35Z https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917322#M9238 Hi Kuko,<BR /><BR />No photo is necessary. The E800 is a Socket 370, but the coppermine and tualatin processors are not interchangeable. This server was only designed to support processors up to 1GHz Coppermine. The HP part number is P2597A.<BR /><BR />Hope this helps,<BR /><BR />Sean T. Craig Sr. C.E.T., M.C.P.<BR /><BR />P.S. Please encourage participation in the forums by assigning points rating the value of the responses.<BR /> Wed, 27 Dec 2006 08:17:12 GMT https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917322#M9238 Sean T. Craig 2006-12-27T08:17:12Z https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917323#M9239 hmm, I was affraid that it's so ... Fri, 29 Dec 2006 11:35:38 GMT https://community.hpe.com/t5/netservers/netserver-e800/m-p/3917323#M9239 Kuko Kukovic 2006-12-29T11:35:38Z