https://community.hpe.com/t5/netservers/network-teaming/m-p/3941536#M9277 Hello Zhang,<BR /><BR />Both the LP1000r and LH6000r do NOT support Windows Server 2003. There is a NOS support matrix available at the following location:<BR /><BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn14552&amp;locale=en_US&amp;prodSeriesId=75195&amp;prodTypeId=15351" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn14552&amp;locale=en_US&amp;prodSeriesId=75195&amp;prodTypeId=15351</A><BR /><BR />Typically, these systems used the Intel 10/100 based adapters. At one stage, HP used a customised version of the Intel driver and teaming software but later switched to using the standard Intel supplied driver, including for teaming.<BR /><BR />Assuming you've installed Windows Server 2003 and found it stable for your needs on these platforms, then I suggest you use the Intel driver and teaming software. I'd have a look at the files as per the location below:<BR /><BR /><A href="http://www.intel.com/support/network/sb/cs-006103.htm" target="_blank">http://www.intel.com/support/network/sb/cs-006103.htm</A><BR /><BR />Andrew. Mon, 12 Feb 2007 23:05:43 GMT Andrew Pywell 2007-02-12T23:05:43Z https://community.hpe.com/t5/netservers/network-teaming/m-p/3941535#M9276 Fot HP NetServer LP 1000r &amp; HP NetServer LH 6000 U3 , Can they support network teaming with windows 2003 ?<BR /><BR /> Fri, 09 Feb 2007 03:24:29 GMT https://community.hpe.com/t5/netservers/network-teaming/m-p/3941535#M9276 zhang lifeng 2007-02-09T03:24:29Z https://community.hpe.com/t5/netservers/network-teaming/m-p/3941536#M9277 Hello Zhang,<BR /><BR />Both the LP1000r and LH6000r do NOT support Windows Server 2003. There is a NOS support matrix available at the following location:<BR /><BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn14552&amp;locale=en_US&amp;prodSeriesId=75195&amp;prodTypeId=15351" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn14552&amp;locale=en_US&amp;prodSeriesId=75195&amp;prodTypeId=15351</A><BR /><BR />Typically, these systems used the Intel 10/100 based adapters. At one stage, HP used a customised version of the Intel driver and teaming software but later switched to using the standard Intel supplied driver, including for teaming.<BR /><BR />Assuming you've installed Windows Server 2003 and found it stable for your needs on these platforms, then I suggest you use the Intel driver and teaming software. I'd have a look at the files as per the location below:<BR /><BR /><A href="http://www.intel.com/support/network/sb/cs-006103.htm" target="_blank">http://www.intel.com/support/network/sb/cs-006103.htm</A><BR /><BR />Andrew. Mon, 12 Feb 2007 23:05:43 GMT https://community.hpe.com/t5/netservers/network-teaming/m-p/3941536#M9277 Andrew Pywell 2007-02-12T23:05:43Z