https://community.hpe.com/t5/netservers/replace-dead-lc2000-embedded-lan-with-lan-board/m-p/4052770#M9448 I am now reasonably sure that the LAN 'card" [embedded on the system processor board?], in our LC2000 P111/933 (P1802A) has croaked.<BR /><BR />Rest of hardware appears ok.<BR /><BR />Can I bypass the LAN Port/ card by dropping in an LH3 PCI 10/100TX Lan Board (D5013-63003)<BR /><BR />If so, are there any installation/set up issues I need to watch out for?<BR />Thank you<BR />GS Thu, 09 Aug 2007 12:13:22 GMT Glen Spackman 2007-08-09T12:13:22Z https://community.hpe.com/t5/netservers/replace-dead-lc2000-embedded-lan-with-lan-board/m-p/4052770#M9448 I am now reasonably sure that the LAN 'card" [embedded on the system processor board?], in our LC2000 P111/933 (P1802A) has croaked.<BR /><BR />Rest of hardware appears ok.<BR /><BR />Can I bypass the LAN Port/ card by dropping in an LH3 PCI 10/100TX Lan Board (D5013-63003)<BR /><BR />If so, are there any installation/set up issues I need to watch out for?<BR />Thank you<BR />GS Thu, 09 Aug 2007 12:13:22 GMT https://community.hpe.com/t5/netservers/replace-dead-lc2000-embedded-lan-with-lan-board/m-p/4052770#M9448 Glen Spackman 2007-08-09T12:13:22Z https://community.hpe.com/t5/netservers/replace-dead-lc2000-embedded-lan-with-lan-board/m-p/4052771#M9449 Simple answer is YES, of course you can add a LAN can. Though I am not sure if there is a disable feature in the BIOS for the onboard. Fri, 10 Aug 2007 08:51:31 GMT https://community.hpe.com/t5/netservers/replace-dead-lc2000-embedded-lan-with-lan-board/m-p/4052771#M9449 e4services 2007-08-10T08:51:31Z