https://community.hpe.com/t5/netservers/reformatting-netserver-lh3000/m-p/4275420#M9557 Lisa,<BR /><BR />there is no need for the Netserver Navigator CD really if your only concern is to configure the raid array. If the server has the Netraid controller enabled in the setup, you can use CTRL M at bootup to configure the array controller and create arrays and logical drives<BR /><BR /><BR />Kris<BR /> Thu, 25 Sep 2008 08:02:52 GMT kris rombauts 2008-09-25T08:02:52Z https://community.hpe.com/t5/netservers/reformatting-netserver-lh3000/m-p/4275419#M9556 I want to reformat an old Netserver but can't remember if it came with a SmartStart CD? If not, what's the best way to reformat? Configuration will include Raid 0 and Raid 5. Wed, 24 Sep 2008 15:03:34 GMT https://community.hpe.com/t5/netservers/reformatting-netserver-lh3000/m-p/4275419#M9556 Lisa Marzilli 2008-09-24T15:03:34Z https://community.hpe.com/t5/netservers/reformatting-netserver-lh3000/m-p/4275420#M9557 Lisa,<BR /><BR />there is no need for the Netserver Navigator CD really if your only concern is to configure the raid array. If the server has the Netraid controller enabled in the setup, you can use CTRL M at bootup to configure the array controller and create arrays and logical drives<BR /><BR /><BR />Kris<BR /> Thu, 25 Sep 2008 08:02:52 GMT https://community.hpe.com/t5/netservers/reformatting-netserver-lh3000/m-p/4275420#M9557 kris rombauts 2008-09-25T08:02:52Z