https://community.hpe.com/t5/netservers/hp-netserver-lh3000-with-damaged-raid-controller/m-p/4291800#M9570 Daniel,<BR /><BR />the Netserver series use the Netraid array controller, the Proliant use the SmartArray raid controller and both are not interchangeable, so the answer is NO.<BR /><BR />If you are using the onboard Netraid controller in your LH3000, what you could do is buy a Netraid PCI plug-in card on the internet (i.e. e-bay or alike) and move the SCSI cable from the onboard controller onto the PCI Netraid controller.<BR />This will allow you to import the raid information from the disks into the PCI Netraid card and boot via that card.<BR />The PCI Netraid card 1si is compatible with <BR />the LH3000 onboard Netraid controller.<BR /><BR />Or if you alrady use a PCI Netraid card, try to find the same one on the internet i.e.<BR />If you have a Netraid 4M, then this is not compatible with with the other Netraid controller series, just keep that in mind, the other are compatible and allow to move disks.<BR /><BR /><BR />HTH<BR /><BR />Kris<BR /><BR /><BR />The only other alternative is another systemboard for the LH3000.<BR /><BR /> Thu, 23 Oct 2008 05:22:26 GMT kris rombauts 2008-10-23T05:22:26Z https://community.hpe.com/t5/netservers/hp-netserver-lh3000-with-damaged-raid-controller/m-p/4291799#M9569 Hello<BR /><BR />I have an LH3000 with a damaged raid controller is it possible to move the disk to another server to read them? the only server I have at hands right now is a HP DL380, but I'm unsure if it will work and also if I will damage the raid info on the disks making it impossible to read the info.<BR /> Wed, 22 Oct 2008 06:57:06 GMT https://community.hpe.com/t5/netservers/hp-netserver-lh3000-with-damaged-raid-controller/m-p/4291799#M9569 Daniel Vikström 2008-10-22T06:57:06Z https://community.hpe.com/t5/netservers/hp-netserver-lh3000-with-damaged-raid-controller/m-p/4291800#M9570 Daniel,<BR /><BR />the Netserver series use the Netraid array controller, the Proliant use the SmartArray raid controller and both are not interchangeable, so the answer is NO.<BR /><BR />If you are using the onboard Netraid controller in your LH3000, what you could do is buy a Netraid PCI plug-in card on the internet (i.e. e-bay or alike) and move the SCSI cable from the onboard controller onto the PCI Netraid controller.<BR />This will allow you to import the raid information from the disks into the PCI Netraid card and boot via that card.<BR />The PCI Netraid card 1si is compatible with <BR />the LH3000 onboard Netraid controller.<BR /><BR />Or if you alrady use a PCI Netraid card, try to find the same one on the internet i.e.<BR />If you have a Netraid 4M, then this is not compatible with with the other Netraid controller series, just keep that in mind, the other are compatible and allow to move disks.<BR /><BR /><BR />HTH<BR /><BR />Kris<BR /><BR /><BR />The only other alternative is another systemboard for the LH3000.<BR /><BR /> Thu, 23 Oct 2008 05:22:26 GMT https://community.hpe.com/t5/netservers/hp-netserver-lh3000-with-damaged-raid-controller/m-p/4291800#M9570 kris rombauts 2008-10-23T05:22:26Z