topic Re: LC3 - Missing Microcode Error in Netservers

LC3 - Missing Microcode Error

nibble — Tue, 08 Apr 2003 05:30:25 GMT

hi guys,
i have here an LC3-dual Processor (PII-405) box and i got this error everytime we boot it up:

0B01-0A-Missing Microcode Update Data Block for PII CPU

we have already replaced the motherboard twice and even updated the bios to a later version.

any advise please? thanks...

Re: LC3 - Missing Microcode Error

Tobias Winkelmann_1 — Tue, 08 Apr 2003 06:22:22 GMT

Hi Nibble,
the stepping of processors in a system should be the same or only differ one step. I had a problem before and got a microcode error, too.
Regards,
Tobias Winkelmann

Re: LC3 - Missing Microcode Error

nibble — Tue, 08 Apr 2003 08:26:50 GMT

may i know of where can i set the stepping of the processors?

thanks..

Re: LC3 - Missing Microcode Error

Tobias Winkelmann_1 — Tue, 08 Apr 2003 09:32:15 GMT

Hi Nibble,
you can see the steppings of your processors on the right site of the summary screen after the POST; shortly before your OS boots.
Regards,
Tobias Winkelmann

Re: LC3 - Missing Microcode Error

nibble — Tue, 08 Apr 2003 11:33:40 GMT

last thing tobias,

where can i SET the steppings?

Re: LC3 - Missing Microcode Error

Dave Unverhau_1 — Wed, 09 Apr 2003 03:25:28 GMT

Nibble,

The steppings cannot be SET. They correspond to the revision of the product - it's a function of the way the chips are manufactured.

Regards,

Dave

Re: LC3 - Missing Microcode Error

nibble — Wed, 09 Apr 2003 04:00:55 GMT

ok. thank you... i think one of the processorst has a problem. one has a value of steppings, the other is EMPTY

Re: LC3 - Missing Microcode Error

nibble — Mon, 04 Sep 2006 05:49:57 GMT

thanks