topic DL360 g4 no configured array in ProLiant Servers (ML,DL,SL)

DL360 g4 no configured array

stephen cossgrove — Tue, 23 Mar 2010 00:38:24 GMT

Hi,

I have been asked to set up a server by my boss and need some help.

When i boot the boot sequence states there is a Smart Array 6i controller card but it is not configured. When i press to configure the array not drives are being detected. I have two 148Gb drives in the front.

What is going on and how do i configure the array?

Re: DL360 g4 no configured array

O.G — Tue, 23 Mar 2010 04:39:07 GMT

Hi Stephen
I Suggest you boot using SmartStart CD, then launch ACU (Array configuration utility), you will see your controller and Drives.

If it still can't detect your drives it may be a physical problem, try running an IML log and search for problems.

Good luck
Orlando

Re: DL360 g4 no configured array

wobbe — Tue, 23 Mar 2010 06:33:38 GMT

This could be your problem

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=855766