https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ml-350-g5-boot-array-selection/m-p/4659665#M104102 Possibly.<BR /><BR />I did notice recently, that it is now possible to select wich array to boot from.<BR /><BR />I can't remember the details.<BR />Try to chek all sub menus in the RBSU.<BR /><BR />BR<BR />/jag Sun, 11 Jul 2010 11:58:23 GMT gregersenj 2010-07-11T11:58:23Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ml-350-g5-boot-array-selection/m-p/4659664#M104101 Hello everyone, <BR />we have a hp ml 350 g5 with a p400 raid controller. Originaly this server had a raid5 with 3 disks and recently we added another array ( raid 1 ) with 2 more disks. The problem is that server tries to boot from the second array which has just data on it, no operating system. Is there a way to set as bootable the raid5 again? <BR />Thanks in advance Sun, 11 Jul 2010 08:15:26 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ml-350-g5-boot-array-selection/m-p/4659664#M104101 Bill Kraniotis 2010-07-11T08:15:26Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ml-350-g5-boot-array-selection/m-p/4659665#M104102 Possibly.<BR /><BR />I did notice recently, that it is now possible to select wich array to boot from.<BR /><BR />I can't remember the details.<BR />Try to chek all sub menus in the RBSU.<BR /><BR />BR<BR />/jag Sun, 11 Jul 2010 11:58:23 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ml-350-g5-boot-array-selection/m-p/4659665#M104102 gregersenj 2010-07-11T11:58:23Z