https://community.hpe.com/t5/proliant-servers-ml-dl-sl/turns-on-no-beep-codes-no-boot/m-p/2727828#M10882 You could have bad memory in the first bank. <BR />Also turn on Swtich number 6 on SW1 bank. This should clear NVRAM.<BR />If you still have problems please either give me your phone number or email address please. Tue, 21 May 2002 23:00:00 GMT Mark Cloutier 2002-05-21T23:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/turns-on-no-beep-codes-no-boot/m-p/2727827#M10881 I have tried reseating everything and nothing. The server turns on and does nothing (just lights on the RAID controller and motherboard). Any ideas? Thanks - Mike Prest Mon, 20 May 2002 23:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/turns-on-no-beep-codes-no-boot/m-p/2727827#M10881 Ayman Altounji 2002-05-20T23:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/turns-on-no-beep-codes-no-boot/m-p/2727828#M10882 You could have bad memory in the first bank. <BR />Also turn on Swtich number 6 on SW1 bank. This should clear NVRAM.<BR />If you still have problems please either give me your phone number or email address please. Tue, 21 May 2002 23:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/turns-on-no-beep-codes-no-boot/m-p/2727828#M10882 Mark Cloutier 2002-05-21T23:00:00Z