topic Re: Proliant DL380 G4 I/O Problem Installing windows 2008 R2 in ProLiant Servers (ML,DL,SL)

Proliant DL380 G4 I/O Problem Installing windows 2008 R2

Rushton Prince — Thu, 12 May 2011 18:52:58 GMT

When trying to install Windows Server 2008 from the internal CD-ROM during the boot process - I get the following error during the pre-installation process:

Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD ROM drive that is failing.
Make sure any removable storage is properly connected and restart your computer.
If you continue to receive this error message, contact the hardware manufacturer.

Status: 0xc00000e9

Info: An unexpected I/O error has occurred.

I have tried using a USB CR-ROM rather than the internal - no go. I have swapped the order fo the SCSI drives - no go. I have recreated logical drives on the RAID controller - no go.

Any help is greatly appreciated.

Re: Proliant DL380 G4 I/O Problem Installing windows 2008 R2

Michael A. McKenney — Thu, 12 May 2011 19:31:18 GMT

2008 R2 requires firmware upgrades on most HP servers. You want the latest firmware and drivers.

Re: Proliant DL380 G4 I/O Problem Installing windows 2008 R2

Rushton Prince — Fri, 13 May 2011 05:06:11 GMT

Hello,

This does have the latest firmware updates 9.10(b) and then 9.10(c).

Still the same problem.

Re: Proliant DL380 G4 I/O Problem Installing windows 2008 R2

Klaus Hagen — Fri, 13 May 2011 08:53:49 GMT

I have same Problem with dl380G7 and MSA2324sa (DAS Storage).

During Installation from CD HP w2k8R2 comes with Firmware 9.2 comes Error 0xc00000e9.

Have you Idear where the Problem is?

Re: Proliant DL380 G4 I/O Problem Installing windows 2008 R2

Klaus Hagen — Fri, 13 May 2011 08:59:39 GMT

OK, i test the Installation with W2k8r2 Action Pack Installation and now no Errors. I think the Problem is the OEM HP w2k8r2 CD PartNumber 589280-021.

Can you confirm this?

Re: Proliant DL380 G4 I/O Problem Installing windows 2008 R2

Michael A. McKenney — Fri, 13 May 2011 17:23:44 GMT

HP will want firmware 9.3 installed. I use the Microsoft DVDs from software assurance not the HP disks.

Re: Proliant DL380 G4 I/O Problem Installing windows 2008 R2

Rushton Prince — Sat, 14 May 2011 03:59:42 GMT

I only see the 9.10(c) firmware posted. Do you have a link to 9.3?