topic Re: ML310 G2 SATA Array - add array in ProLiant Servers (ML,DL,SL)

ML310 G2 SATA Array - add array

Jim Barton — Tue, 05 Jun 2007 15:40:46 GMT

The server has 2-80GB drives RAID1 but we need more storage space. 2-250GB drives were connected to the 2 additional SATA ports but the drives were not detected during POST. Is it necessary to enter the BIOS setup to enable the additional ports? Will the controller support 2 arrays?

Thanks!

Re: ML310 G2 SATA Array - add array

Ryan Goff — Tue, 05 Jun 2007 15:49:43 GMT

Are the two drives detected in CTRL+A?

Re: ML310 G2 SATA Array - add array

Ryan Goff — Tue, 05 Jun 2007 15:52:34 GMT

Ahh, I think I found your answer here:

*NOTE: A maximum of two hard drives are supported when integrated RAID is enabled. Use of hot plug SATA hard drives in positions 2 and/or 3 requires either a non-RAID configuration or installation of the HP 6-port SATA RAID controller (P/N 372953-B21) and the HP 4-port SATA/SAS target fan cable (P/N 389653-B21).

http://h18000.www1.hp.com/products/quickspecs/12168_na/12168_na.HTML

This is from the Storage section. Seems that in order to do what you want, you'd have to order a new PCI storage controller or turn off raid alltogether.

Re: ML310 G2 SATA Array - add array

Jim Barton — Tue, 05 Jun 2007 16:07:55 GMT

I guess we will have to add another controller.

Thanks for finding the answer so quickly!