topic configure DB array as SB array in ProLiant Servers (ML,DL,SL)

configure DB array as SB array

VeronicaTobon — Thu, 12 Jun 2008 21:08:26 GMT

Is possible to configure a Dual bus storage array as a single bus array?
I have a 302970-b21 db storage array and I want to configure with only one scsi cable.

Re: configure DB array as SB array

Torsten. — Fri, 13 Jun 2008 08:13:00 GMT

I think this was already solved in your other thread:

http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1239685

The difference between the SB and DB model is the I/O module.

If you connect only 1 cable to the DB module, you have only the left *OR* right half connected.

Replace the DB with a SB module to get the SB model.

Re: configure DB array as SB array

Torsten. — Fri, 13 Jun 2008 08:14:03 GMT

Remember to read this:

http://forums12.itrc.hp.com/service/forums/helptips.do?#33

;-)

Re: configure DB array as SB array

VeronicaTobon — Fri, 13 Jun 2008 12:15:45 GMT

ok, we'll buy nee modules.