topic HP System Mgmnt Timeout in ProLiant Servers (ML,DL,SL)

HP System Mgmnt Timeout

ServerEngineer — Wed, 10 Nov 2010 10:21:31 GMT

Hi Team,

While launching HP Systm Mgmnt HomePage on One of our DL380 G3 Server,the page keeps timing out. Generally if we click ok to this Message,it goes away but then is it wise to go with the information displayed?
Also Diagnostics test is not available on this page.
Syst.Mgmnt Version : 6.2.0.13

SNMP services has proper entries updated and the timeout settings are also been increased.
Any other solutions for this?

Re: HP System Mgmnt Timeout

ess — Wed, 10 Nov 2010 12:08:31 GMT

Hi
please restart service hp mamnt home page management in the services and please again check .

Re: HP System Mgmnt Timeout

ServerEngineer — Wed, 10 Nov 2010 17:27:10 GMT

Hi,

Thanks for your reply.
I tried it and it still the same. I've restarted the SNMP services which has the dependancy of all the HP services but its still the same.

Re: HP System Mgmnt Timeout

SMR — Wed, 10 Nov 2010 23:58:19 GMT

The system management homepage log usually tells you what the problem is. Most of the time the version control agent is producing the timeout. Try uninstalling the vca and access the smh again.

Good luck!

Re: HP System Mgmnt Timeout

ServerEngineer — Thu, 11 Nov 2010 10:05:09 GMT

Hi ,

Thanks again..

I found in SNMP Services, traps were configured incorrectly. I correcte that with the server where HP System Mgmt is working fine and restarted the HP System Management service and Version Control Agent service.
Now its working fine.
As you said, Version control Agent should also be up to date and mine is too. :)
Now all are fine.

Thanks a lot for your time..

Re: HP System Mgmnt Timeout

ServerEngineer — Thu, 11 Nov 2010 10:06:47 GMT

After SNMP is configured properly and restarted the HP System Management Home Page services, everything is working fine