https://community.hpe.com/t5/proliant-servers-ml-dl-sl/facing-problems-on-ml330-g6/m-p/5369141#M124483 <P>A while back I got a second hand ML330 to test a few applications on ESX. It's all been good up until recently. It was out of action for a couple of weeks while we were waiting for some drives to arrive. Stuck those in and all of a sudden when the thing is powered up one of the fans goes straight to full speed and stays there.<BR /><BR />&nbsp;Thought it a dodgy fan so pulled off the cover and started swapping fans. Strange thing is both fans work fine when plugged in the fan 2 power socket. Plug either into the fan 3 socket and it ramps to full speed on power up and sits there.</P> <P>&nbsp;</P> <P>So it seems it's not the fans but something to do with the fan 3 socket. Doesn't seem to be the tempature sensor, normal values are being reported. Looking through the docs I don't see anything else on the board related to the fans. I'm baffled here, anyone have any ideas?</P> Mon, 24 Oct 2011 06:35:33 GMT Dagon_ 2011-10-24T06:35:33Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/facing-problems-on-ml330-g6/m-p/5369141#M124483 <P>A while back I got a second hand ML330 to test a few applications on ESX. It's all been good up until recently. It was out of action for a couple of weeks while we were waiting for some drives to arrive. Stuck those in and all of a sudden when the thing is powered up one of the fans goes straight to full speed and stays there.<BR /><BR />&nbsp;Thought it a dodgy fan so pulled off the cover and started swapping fans. Strange thing is both fans work fine when plugged in the fan 2 power socket. Plug either into the fan 3 socket and it ramps to full speed on power up and sits there.</P> <P>&nbsp;</P> <P>So it seems it's not the fans but something to do with the fan 3 socket. Doesn't seem to be the tempature sensor, normal values are being reported. Looking through the docs I don't see anything else on the board related to the fans. I'm baffled here, anyone have any ideas?</P> Mon, 24 Oct 2011 06:35:33 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/facing-problems-on-ml330-g6/m-p/5369141#M124483 Dagon_ 2011-10-24T06:35:33Z