https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hpcisss2-error-129-on-ml110-with-e200-128/m-p/5493723#M125833 <P><SPAN><SPAN class="hps">Hello</SPAN><BR /><BR /><SPAN class="hps">As</SPAN> <SPAN class="hps">Solicitousness</SPAN> <SPAN class="hps">Error.</SPAN> <SPAN class="hps">I have the</SPAN> <SPAN class="hps">same problem</SPAN><BR /><BR /><SPAN class="hps">thanks</SPAN></SPAN></P> Fri, 13 Jan 2012 08:30:30 GMT Juan_huayane 2012-01-13T08:30:30Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hpcisss2-error-129-on-ml110-with-e200-128/m-p/4525132#M96029 Hi there,<BR /><BR />we use a ML110G4 with an E200/128 Controller running SBS2008. Patch Level and Drivers are up to date.<BR />Since two weeks the integrated SBS2008 Backup fails, while the error log states a 129 error from HpCISSs2 (reset to device \Device\RaidPort0 was issued), followed by an Error 11 from disk (controller error on \Device\Harddisk0\DR0). These Errors only occur during backup hours. Backup target is a external USB HDD, attached is an ACU diagnostics report FYI.<BR /><BR />Im a little bit helpless on this, any ideas?<BR />Greetings, Dennis Sun, 01 Nov 2009 11:41:53 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hpcisss2-error-129-on-ml110-with-e200-128/m-p/4525132#M96029 Dennis Mauch 2009-11-01T11:41:53Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hpcisss2-error-129-on-ml110-with-e200-128/m-p/5493723#M125833 <P><SPAN><SPAN class="hps">Hello</SPAN><BR /><BR /><SPAN class="hps">As</SPAN> <SPAN class="hps">Solicitousness</SPAN> <SPAN class="hps">Error.</SPAN> <SPAN class="hps">I have the</SPAN> <SPAN class="hps">same problem</SPAN><BR /><BR /><SPAN class="hps">thanks</SPAN></SPAN></P> Fri, 13 Jan 2012 08:30:30 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hpcisss2-error-129-on-ml110-with-e200-128/m-p/5493723#M125833 Juan_huayane 2012-01-13T08:30:30Z