topic Cannot run Array Configuration Utility in ProLiant Servers (ML,DL,SL)

Cannot run Array Configuration Utility

Gordon W Smith — Mon, 13 Feb 2006 14:12:02 GMT

I have an HP ML350 G4. When I attempt to run the ACU, I just get a "The page cannot be displayed" error.

I've attempted to run the setup and it runs, but then nothing (not sure if it has multiple windows that open or not.)

Also, I seem to have forgotten (or maybe never knew) the Admin password for the management page. I took over management of this server from someone else, so there's a possibility I never knew it. Is there a way to reset?

Re: Cannot run Array Configuration Utility

Kedd Guyton — Tue, 14 Feb 2006 09:04:21 GMT

You can run the ACU from Windows or the SmartStart CD.

The following explains how to change the Systems Management Homepage / ACU passwords from within Windows:
http://www.tek-tips.com/viewthread.cfm?qid=50276&page=8

Re: Cannot run Array Configuration Utility

cdmarina — Wed, 08 Sep 2010 16:44:15 GMT

An oldie but a goodie. Same prob I'm CURRENTLY having.

I've installed a new disk. System Management sees it but I can't run ACU from Windows. IE8 displays same error as the guy above. Lowering security settings or removing Enhanced Security doesn't help either.

You CAN'T run ACU directly from the CD - the opening menu page of the CD states this. You can (re)boot from CD. I'm trying to avoid an unneccesary reboot.

Why is IE8 being stubborn? How do you get ACU GUI to work?

The CLI appears to be working. Does ANYONE know some simple command lines for the CLI? It's not as nice as Cisco IOS or Powershell. I could use some CLI help to save me the hassle of a reboot.