topic Re: ML110 G7 iLO3 in ProLiant Servers (ML,DL,SL)

ML110 G7 iLO3

JeremyS132 — Fri, 13 Apr 2012 20:02:40 GMT

Greetings! I bought a ML110 G7 with an iLO on it to use it as I like the concept of iLO. I did not get a dedicated iLO port. Now as I understand it, this shares the same IP address as the first NIC onboard. My 1st NIC has been assigned 10.10.1.138 but when I try to http or https to that address nothing happens. The drivers for iLO are installed. How can I get this to work or how can I access the iLO? I am running Windows Server 2008 R2 Enterprise x64 edition. Please help!

Re: ML110 G7 iLO3

Michael A. McKenney — Fri, 13 Apr 2012 20:22:45 GMT

On POST does it give you an option to configure ILO like most HP servers have? If yes, you need to configure the IP address, user, password, etc.

Re: ML110 G7 iLO3

JeremyS132 — Fri, 13 Apr 2012 20:42:01 GMT

Michael do you know what option I would be looking for? On the HP ProLiant boot screen I have the options for F9 for Setup F11 for Network Boot and F12 for Boot Menu. I do not see anything for iLO here. I have looked through the setup and didn't see anything either.

Re: ML110 G7 iLO3

Michael A. McKenney — Fri, 13 Apr 2012 21:20:21 GMT

http://www.itpro.co.uk/636430/hp-proliant-ml110-g7-review

see if this helps. I use 300 series servers

Re: ML110 G7 iLO3

JeremyS132 — Fri, 13 Apr 2012 21:24:13 GMT

Michael thanks for the link however it doesn't help. "The iLO3 shares access with the first of the server’s two Gigabit Ethernet ports, but you can buy an optional upgrade which adds a dedicated management port." I have tried the IP that DHCP handed out but no dice on connecting to the iLO. I am starting to get extremely frustrated.

Re: ML110 G7 iLO3

Michael A. McKenney — Fri, 13 Apr 2012 21:29:07 GMT

I would consider getting the dedicated ILO port.

Re: ML110 G7 iLO3

Goutham_Sabala — Mon, 16 Apr 2012 09:00:29 GMT

100 Series server will have IPMI under Bios to configure ILO

Re: ML110 G7 iLO3

JeremyS132 — Mon, 16 Apr 2012 13:19:57 GMT

Goutham Sabala thanks for the information. I tried searching for this setting when I pushed F9 and was not able to locate it. I did check in the Advanced Settings etc. Do you happen to know where this setting is found in the BIOS?

Re: ML110 G7 iLO3

Goutham_Sabala — Mon, 16 Apr 2012 13:28:36 GMT

Looks like you are not using dedicated controller which means that integrated nic card will work as shared port for ilo and nic traffic

Are you sure you have been here in the bios ?

once in the bios, Advanced Menu , go to IPMI , LAN Settings menu and you should find static.

Re: ML110 G7 iLO3

JeremyS132 — Mon, 16 Apr 2012 13:42:57 GMT

Correct I am not using the dedicated controller. The problem that I am having is that my first NIC Card which is labeled "Local Area Connection" in Windows Server 2008 Enterprise was assigned 10.10.1.139 as an IP and when I http or https to that IP address the ilo web page does not load. So at this point I cannot get ILO to load at all.

Re: ML110 G7 iLO3

Goutham_Sabala — Mon, 16 Apr 2012 14:08:45 GMT

I'm assuming that you been to IPMI and you setup BMC for shared Nic and then static and you have setup a IP address 10.10.1.139 even after that you are not able to access ILO ?

Re: ML110 G7 iLO3

JeremyS132 — Mon, 16 Apr 2012 14:44:07 GMT

Goutham Sabala, sorry no I did not. I cannot locate the IPMI menu. Here is what I have listed for my Advanced Options in the BIOS.

Advanced System ROM Options

Video Options

Thermal Configuration

Service Options

Advance Performance Tuning Options

Asset Tag Protection

SATA Controller Options

I have checked every submenu and I cannot locate IPMI. Any ideas?

Re: ML110 G7 iLO3

Goutham_Sabala — Mon, 16 Apr 2012 15:02:06 GMT

While I check into this , would you please check if your server accepts the ILo firmware update?

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5075943&taskId=135&cc=us&lang=en&prodSeriesId=5075942&prodTypeId=15351

Choose the correct OS and look for lights out firmware

Edit : since the server doesnt have a dedicated ilo card, Im not sure if the server accepts the above ILO firmware ( but you can still try the ilo firmware ) along with System bios ( please update the systemm bios as well - which may allow us to see IPMI in bios )

> Bios first and then ILO firmware

Re: ML110 G7 iLO3

JeremyS132 — Mon, 16 Apr 2012 15:36:40 GMT

Goutham Sabala, thanks for the information. I have pushed the 04/21/2011 BIOS to the machine and have re-installed the 1.28 iLO drivers and they both installed successfully. The same issue persists I cannot find the IPMI menu. Please advise.

Re: ML110 G7 iLO3

Oscar A. Perez — Mon, 16 Apr 2012 16:58:12 GMT

The ML110 G7 comes with iLO3 not with the old LO100i.

During POST, press any key as soon as you see that message at the bottom of the screen saying something about pressing a key to see all POST messages. Shortly after that you should be able to see Integrated Lights-Out 3 Option ROM asking you to press F8 to enter RBSU.

Once in iLO RBSU, you can see and change the network settings. If you don't have the iLO dedicated NIC option, be sure that the 'Network Interface Adapter' is set to 'Shared Network Port'. If you want static IP address, you have to first disable DHCP then manually enter IP address, net mask, gateway, DNS, etc . Finally, don't forget to create a new user with admin priviledges. After exiting RBSU, iLO is going to reboot to take the new network settings.

About iLO shared NIC, if your environment allows you to have a separate network connection for iLO3, please buy the iLO dedicated NIC. It is much better. The shared NIC is good for cases where customers cannot afford to have a separate network cable for every iLO in their datacenters but, shared NIC is not an ideal solution. iLO is basically at the mercy of the server's NIC. Every time the server NIC is reset either because the server is rebooting or the OS is loading the NIC driver, iLO would not be available for up to 5 seconds. This causes few headaches. The dedicated NIC will ensure your iLO will always be there.

Re: ML110 G7 iLO3

JeremyS132 — Mon, 16 Apr 2012 17:19:43 GMT

Thank you so much for the help that is exactly what I needed. I appreciate the information and will look at adding the dedicated iLO.

Re: ML110 G7 iLO3

ExpertSkinDoc — Tue, 13 Feb 2018 16:42:54 GMT

Disable the fancy Boot POST splash in BIOS, then when you boot up, you will see the prompt <press F8 to modify iLO3>.

Took me a while to figure it out why I couldn't get to the iLO modification page, but disabling the fancy splash and voila, I was able to get in and set up iLO.

I like the shared NIC. I have 3 GML110 G7's, 2 of them have dedicated NIC, I still used shared NICs, it's so convenient to use, no need to have another network cable.