https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dr-tape-solution-on-ml370-smart-array-controller/m-p/2838258#M12957 Im using Veritas Backup Exec 8.6. Mon, 04 Nov 2002 10:41:42 GMT Bart D'haese 2002-11-04T10:41:42Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dr-tape-solution-on-ml370-smart-array-controller/m-p/2838257#M12956 Hi,<BR /><BR />when performing a DR tape recovery, the tape boots up but when starting Operating system (WINNT 4.0 SRV),during the restore, i get the error "No harddisk found". The problem is that i tries to boot from a different controller, because the tape device is on the SCSI controller onboard en the disks on the smart array controller. Does anyone can help me with this problem? Or is someone having the same problem?<BR /><BR />Regards Mon, 04 Nov 2002 10:40:54 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dr-tape-solution-on-ml370-smart-array-controller/m-p/2838257#M12956 Bart D'haese 2002-11-04T10:40:54Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dr-tape-solution-on-ml370-smart-array-controller/m-p/2838258#M12957 Im using Veritas Backup Exec 8.6. Mon, 04 Nov 2002 10:41:42 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dr-tape-solution-on-ml370-smart-array-controller/m-p/2838258#M12957 Bart D'haese 2002-11-04T10:41:42Z