topic ML110: The Power Manager is unavailable for this configuration in ProLiant Servers (ML,DL,SL)

ML110: The Power Manager is unavailable for this configuration

djboris — Wed, 13 Jun 2012 18:18:21 GMT

Hello

I have a ProLiant ML110 server with iLO 1.26 (last version). When I go to the "Power Meter" in iLO, I see this message: "The Power Manager is unavailable for this configuration.". I tried to change the Power Settings (it displays: "Power Cap is not supported"), but it didn't helped.

How can I display the "Power Meter"?

Thanks

Kind Regards

Boris

Re: ML110: The Power Manager is unavailable for this configuration

Suman_1978 — Thu, 14 Jun 2012 02:52:07 GMT

Hi,

What is the generation of this ML110?

http://h18004.www1.hp.com/products/servers/management/dynamic-power-capping/support.html

Dynamic Power Capping is supported on all BL/DL/ML G7 or later servers with the exception of the ML110 G7, and DL120 G7. All G7 or later servers ship with the minimum required firmware to enable Dynamic Power Capping Support.

Also please note the following:

http://h18004.www1.hp.com/products/servers/management/dynamic-power-capping/faq.html

For HP ProLiant servers, the following components are necessary to make full use of Dynamic Power Capping.
» iLO Advanced license.
» Insight Power Manager.

Re: ML110: The Power Manager is unavailable for this configuration

djboris — Fri, 15 Jun 2012 19:38:27 GMT

Hello

Thanks for you reply. I will read the documents ASAP.

It's a G7 with a iLO Advanced license.

Boris

Re: ML110: The Power Manager is unavailable for this configuration

Sungam — Fri, 05 Oct 2012 13:22:18 GMT

If the DL120 G7 have iLO 3 Advanced License installed the Dynamic Power Capping Support will enable?

Re: ML110: The Power Manager is unavailable for this configuration

mysy — Thu, 08 Apr 2021 03:42:00 GMT

» Insight Power Manager.

how to install this item?

my ml110 g9 use replace motherboard.