Proliant DL380 G5 & Windows Server 2008 R2

SvenM — Sat, 23 Jun 2012 09:56:06 GMT

Hi Folks,

I'm trying to install Windows Server 2008 R2 onto a Proliant DL380 G5. So far quite unsuccessful :-(

When i try to install the Server using the Smartstart 8.7b x64 everything starts good, after the first reboot Windows server starts installing but after the second reboot during the installation; bang: it seems the is no OS on drive C: anymore.

Well and if I try to install Windows Server 2008 R2 without the Smartstart, well, I can sse the disk, I can partition the disk but when I press next for the Installtion to begin it tells me "Setup was unanble to create a new system partion......" That happens even after I provided the driver for the P400 Smart Array Controller.

I already upgraded the Firmware of the Server with the Firmware DVD 10.10

If sound a bit frustrated, well I'm since spent > 6 hrs trying to install that *!"§/? Server

I hope somebody here can hepl me out.

Thanks in advance,

Sven

Re: Proliant DL380 G5 & Windows Server 2008 R2

Suman_1978 — Mon, 25 Jun 2012 03:21:05 GMT

Hi,

Make sure there isnt any USB storage devices like memory key or usb hard drives connected.

See this article if it helps you.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03270774

Thank You!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

For product specific Guided Troubleshooting visit; http://www.hp.com/support/hpgt
Want to know How to use HP Guided Troubleshooting? Visit the below link.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03283214

topic Proliant DL380 G5 & Windows Server 2008 R2 in ProLiant Servers (ML,DL,SL)

Proliant DL380 G5 & Windows Server 2008 R2

Re: Proliant DL380 G5 & Windows Server 2008 R2