topic upgrade memory for server dl380gl 380 g7 in ProLiant Servers (ML,DL,SL)

upgrade memory for server dl380gl 380 g7

usufhalmet — Mon, 11 Mar 2013 05:04:28 GMT

Hello. I have two servers hp380g7 E5620-s\n:CZ2048JML6,

CZ2048JMLR. When plates move the memory from 1 to 2 to increase the server, the server will not start

P.S. this thread has been moved from ProLiant Servers - Netservers to ProLiant Servers (ML,DL,SL) - HP Fourms Moderator

Re: upgrade memory for server dl380gl 380 g7

Robert_Jewell — Fri, 08 Mar 2013 20:08:29 GMT

So, you are moving memory from one server to another and the system with the newly installed memory is not booting?

- Are all of the memory DIMMs the same (non-HP memory can be problematic)?

- Check the slots that the new memory is installed in. This order depends on if you have one or two CPU's. See the below diagram. This shows an example of several 4GB DIMMs installed, but you can use it a reference. Install A first, B second, C third, and so on. If you have two CPU's, alternate between CPU's (1st DIMM - CPU 1, A; 2nd DIMM - CPU 2, A, etc).

Re: upgrade memory for server dl380gl 380 g7

Murali_V — Mon, 11 Mar 2013 01:45:23 GMT

Hi,

In addition to Robert's comments, refer the DDR3 memory population guidelines from DL380 G7 QuickSpec document:

http://h18004.www1.hp.com/products/quickspecs/13595_div/13595_div.html#Memory

Regards,
Murali Mohan