Low level errors receiving data using TCP/IP

khburrell — Mon, 18 Mar 2013 04:51:23 GMT

I am using a DL360/G6 server with 2 CPUs. I begin getting a low level of receive errors when using TCP/IP using a NC382i NIC card. The errors begin when a large amount of data is received by the server. Any others having problems with TCP/IP? We actually have our own protocol that bypasses TCP/IP and when we use that instead of TCP/IP we do not see the receive problems.

P.S. this thread has been moevd from Servers > General to ProLiant Servers (ML,DL,SL) - Hp forums moderator

Re: Low level errors receiving data using TCP/IP

Johan Guldmyr — Mon, 18 Mar 2013 06:58:02 GMT

Running several DL360G7 (also has NC382i), two TCP/IP LACP bonds on each machine. One going to an extreme switch and another to an HP procurve. Likely not optimal configuration in regards to lacp-mode on switch but it's working.

ifconfig|grep errors shows zero errors on all devices.

Not seeing any errors on the switch sides on the client ports either.

1 CPU.

topic Low level errors receiving data using TCP/IP in ProLiant Servers (ML,DL,SL)

Low level errors receiving data using TCP/IP

Re: Low level errors receiving data using TCP/IP