topic Re: ML 350 G5: server does not switch off but reboots after "shutdown -hf now" in ProLiant Servers (ML,DL,SL)

ML 350 G5: server does not switch off but reboots after "shutdown -hf now"

blentes — Wed, 17 Jul 2013 13:14:16 GMT

Hi,

we have a HP ProLiant ML 350 G5 running SLES 11 SP2. If i shutdown the server using "shutdown -hf now" on the console, the server shutdown itself, but immediately starts again and does not switch off. This behaviour is problematic because we shutdown the server with PowerChute Network Shutdown by APC when power is off. But when it reboots instead of shutdown, it is running when the UPS switchs of itself after several minutes, and the server fall down, maybe leaving a corrupte filesystem or database. This is what i try to avoid. SLES 11 SP2 is running the most recent kernel from SuSE, and the server has the newest firmware (D21, 05/02/2011). Also setting BIOS to default does not help.

Thanks for any help.

Bernd

Re: ML 350 G5: server does not switch off but reboots after "shutdown -hf now"

Suman_1978 — Thu, 18 Jul 2013 04:09:32 GMT

Hi,

Have you tried the followig commands:

shutdown -h

halt -p

Thank You!
I am a HP employee.

Re: ML 350 G5: server does not switch off but reboots after "shutdown -hf now"

blentes — Thu, 18 Jul 2013 09:28:15 GMT

Hi,

i will try it and keep you informed. Also i will try a Linux booted from a live CD (e.g. Knoppix).

Bernd

Re: ML 350 G5: server does not switch off but reboots after "shutdown -hf now"

blentes — Fri, 19 Jul 2013 17:12:28 GMT

Hi,

i tried:

- shutdown -h

- poweroff

- init 0

- halt -p

Always the same. No shutdown, but reboot. I tried knoppix with ambiguous result:

First shutdown: cd tray opened, knoppix says "press return to switch off (i can't remember the exact text)", i pressed return ==> reboot !

Second shutdown: i didn't press enter, but waited 2 minutes to see what knoppix will do ==> Server didn't switch off, health led got amber, nothing further happened. I switched off and on ==> normal reboot.

I'm running out of ideas. Next week i will test with Windows PE to see if these results are clearer.

Or could it be someting wrong configured in the RBSU ?

Thanks for any tip.

Bernd

Re: ML 350 G5: server does not switch off but reboots after "shutdown -hf now" - SOLVED

blentes — Thu, 25 Jul 2013 11:44:56 GMT

Hi,

finally i managed it. I had to deactivate ASR and WOL in the RBSU, now the server shuts down with "shutdown -hf now".

Bernd