topic Re: ML350 G6 Raid 5 Creation in ProLiant Servers (ML,DL,SL)

ML350 G6 Raid 5 Creation

Feras_L — Mon, 22 Jul 2013 10:25:44 GMT

Hello,

I have Proliant ML350 G6 server and three HD that I want to create RAID 5 on them. I reached the array configuration utility inside the server but it only gave me RAID 0 and RAID 0+1 options to create a RAID and for sure only allowed me to used RAID 0+1. When I used the SmartStart CD and in there I got only RAID 0 option. I have to use those three HD to be big enough to restore the SBS backup file. Is there a way to get RAID 5 option here??

Note: I used SmartStart 8.70.9 and updated Firmware to 9.2

Please advice, thanks

Re: ML350 G6 Raid 5 Creation

Stephan_K — Mon, 22 Jul 2013 11:23:34 GMT

Hi,

the ML350 G6 has an P410 Raid controller built in with different options.

The entry models (Product# 638180-xx1) have an Embedded HP Smart Array P410i/Zero Memory Controller which only can do RAID 0/1/1+0

The higher levels (Base and Performance) could also do Raid-5/5+0.

Regards

stephan

Re: ML350 G6 Raid 5 Creation

Marko71 — Mon, 22 Jul 2013 15:28:09 GMT

Hi,

As mentioned above if your model is a zero mem model then you will have no access to advanced raid modes.

To enable these all you have to do is buy a 512mb cache module, this will unlock raid 5 for you.

Hope this helps

Regards

Mark

Re: ML350 G6 Raid 5 Creation

Feras_L — Tue, 23 Jul 2013 12:52:21 GMT

Hello,

Thanks for the replies... yes it seems its the basic RAID Array Controler, thus no RAID 5 options.