topic Re: Hard Drives with Different Speeds in same server in ProLiant Servers (ML,DL,SL)

Hard Drives with Different Speeds in same server

nss-tech — Thu, 11 Apr 2013 14:37:50 GMT

We have an ML350 G5 and want to replace the drives. We are looking at 2 15k RPM SAS drives with 2 7200RPM SAS drives. Can we put the drives in the hot swap caddy together even though they have different speeds?

Re: Hard Drives with Different Speeds in same server

Mark Matthews — Thu, 11 Apr 2013 16:01:59 GMT

You can run different speed drives on the same array controller, however the slower speed will take priority, ie all drives will run at 7.2k.

Same thing happens when you mix interface speeds, ie 3G and 6G
.

Re: Hard Drives with Different Speeds in same server

nss-tech — Fri, 12 Apr 2013 13:49:56 GMT

Thanks, that's what I thought.

Re: Hard Drives with Different Speeds in same server

Torsten. — Fri, 12 Apr 2013 14:34:05 GMT

>> however the slower speed will take priority, ie all drives will run at 7.2k.

Not really, but the faster drives will have to wait for the slower drives, so expect a lower overall performance (if you mix them).
Keep in mind you cannot/should not mix different drive technologies in the same raid group.

Re: Hard Drives with Different Speeds in same server

Richardc0077 — Sun, 06 Oct 2013 23:05:39 GMT

Hi all

I intend to replace my 72gb harddrives with

WD Western Digital 2.5" 500GB SATA 3 HDD 7200rpm Hard Drive Laptop Internal NEW

does anyone see a problem with compatiablity with the server

many thanks

Richard C