https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380p-gen8-no-display-no-post-flashing-red-health-led/m-p/6307823#M139867 <P>I am trying to configure a DL380p Gen8, 25 SFF bay server and have no display, no post code and a flashing red health status LED.&nbsp; The first thing I thought of was ram so I took out all 12 modules and put one back into slot A of channel 1 (only one processor), powered it back on and had the same results.&nbsp; I can get into iLo, however, its displaying an incorrect/weird server serial number that has two % signs in it and is nothing like the printed serial.&nbsp; I flashed the iLo firmware which seemed to be successful but now remote console says undefind and doesn't bring anything up.&nbsp; As far as the status under iLo it says Failed on the BIOS/Hardware Health line, but there doesn't seem to be any corresponding information when I click on it.&nbsp; Everything else seems to say OK except for the memory which doesnt provide any information because it didn't complete POST.&nbsp; The processor is a E5-2630 V2, BIOS revision is P70 From February 2013; didn't know if there may be some incompatibility there that would cause this.&nbsp; Any suggestions?</P> Tue, 17 Dec 2013 20:41:10 GMT lfenchel07 2013-12-17T20:41:10Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380p-gen8-no-display-no-post-flashing-red-health-led/m-p/6307823#M139867 <P>I am trying to configure a DL380p Gen8, 25 SFF bay server and have no display, no post code and a flashing red health status LED.&nbsp; The first thing I thought of was ram so I took out all 12 modules and put one back into slot A of channel 1 (only one processor), powered it back on and had the same results.&nbsp; I can get into iLo, however, its displaying an incorrect/weird server serial number that has two % signs in it and is nothing like the printed serial.&nbsp; I flashed the iLo firmware which seemed to be successful but now remote console says undefind and doesn't bring anything up.&nbsp; As far as the status under iLo it says Failed on the BIOS/Hardware Health line, but there doesn't seem to be any corresponding information when I click on it.&nbsp; Everything else seems to say OK except for the memory which doesnt provide any information because it didn't complete POST.&nbsp; The processor is a E5-2630 V2, BIOS revision is P70 From February 2013; didn't know if there may be some incompatibility there that would cause this.&nbsp; Any suggestions?</P> Tue, 17 Dec 2013 20:41:10 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380p-gen8-no-display-no-post-flashing-red-health-led/m-p/6307823#M139867 lfenchel07 2013-12-17T20:41:10Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380p-gen8-no-display-no-post-flashing-red-health-led/m-p/7040103#M166110 <P>This post is extremely old, but I am hoping you see this.&nbsp; Did you ever find a solution? I have the identical problem you had on the identical hardware.&nbsp; I have tried replacing everything including the motherboard and cannot get this box going.</P> Thu, 28 Mar 2019 14:14:11 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380p-gen8-no-display-no-post-flashing-red-health-led/m-p/7040103#M166110 RDabrowski 2019-03-28T14:14:11Z