topic Re: Installing CentOS 6.3 to DL360e can't load driver for smart array controller in ProLiant Servers (ML,DL,SL)

Installing CentOS 6.3 to DL360e can't load driver for smart array controller

BradV — Thu, 21 Nov 2013 11:19:53 GMT

I'm trying to install CentOS 6.3 to a DL360e G8. I've downloaded the hpvsa driver (hpvsa-1.2.4-4.rhel6u3.x86_64.dd.gz) and burned that to a cd. During the install when trying to load the driver, it said this was not the correct driver for this operating system. I know its not RHEL but CentOS, but surely the driver can't be that finicky? Is there a different driver for CentOS?

Thanks!

Re: Installing CentOS 6.3 to DL360e can't load driver for smart array controller

BradV — Thu, 21 Nov 2013 11:35:00 GMT

Well, apparently the driver is that specific. I just found this HP document. It explains that they don't provide a driver for CentOS. This really bites. :(

Re: Installing CentOS 6.3 to DL360e can't load driver for smart array controller

viniciof — Thu, 21 Nov 2013 13:34:37 GMT

Hello BradV,

Even if it's not supported by HP, I'm pretty sure will work and can be installed. Follow the details in this HP Documetn to do it using the RHEL driver:

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03582943-1%257CdocLocale%253Den_US&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01&sp4ts.oid=4248009&ac.admitted=1385040200043.876444892.199480143

I had problems using USB and DVD to load the driver, the best way to do it was with iLO.

I've extracted the driver hpvsa-1.2.4-4.rhel6u3.x86_64.dd.gz using winrar (free version) then renamed from .dd to .img

After that loaded the OS, pressed ESC to be able to load the driver, and using iLO with the Integrated Remote Console mounted a Image File (Removable media) and selected the driver I just renamed to .img

It loaded corerctly but did not showed a confirmation, just asked me if I want to load more drivers, I said NO.

Continued with the installation and I saw the HP Logical Drive available to install OS.

Rgds,

Re: Installing CentOS 6.3 to DL360e can't load driver for smart array controller

Jimmy Vance — Thu, 21 Nov 2013 20:54:22 GMT

I just verified on a system with a B120i. hpvsa-1.2.44-4.rhel6u3.x86_64.dd loads fine with Centos 6.3. Are you sure your using 6.3 and not a different release version?

All I did was gunzip the image and copied it to a USB stick. On the kernel boot line, I added "blacklist=ahci dd" The blacklist option isn't required for a B320i controller, just he B120i

During boot, the installer asked if I hada a driver disk, then pointed to the usb device and loaded the driver

Re: Installing CentOS 6.3 to DL360e can't load driver for smart array controller

EagleRed — Thu, 28 Nov 2013 16:10:46 GMT

Hello,

I 've the same problem with B320i controller.

Any hint to solve the problem?

Thanks for your support.

Best Regards,

EagleRed

Re: Installing CentOS 6.3 to DL360e can't load driver for smart array controller

BradV — Fri, 29 Nov 2013 10:57:07 GMT

Yes, I am using CentOS 6.3. USB sticks are strickly forbidden. I could lose my job for bringing one of those in. So, I used a cd. I go through the whole driver load, but it keeps saying this driver isn't for this OS. I need to call the HP support line and see if they have any further information.

Re: Installing CentOS 6.3 to DL360e can't load driver for smart array controller

Jimmy Vance — Mon, 02 Dec 2013 13:07:44 GMT

gunzip the file on your client system and use iLO virtual Media to mount the driver image. If you don't have the advanced pack license for iLO, you can get a 30 day trail license so you can use the virtual media features while installing the OS

Re: Installing CentOS 6.3 to DL360e can't load driver for smart array controller

BradV — Fri, 20 Dec 2013 17:07:54 GMT

OK, finally got this resolved. HP said that it is because the kernel on the installation dvds used during the installation has drivers for usb but not reading the cd (or something like that). So, it can't mount the cdrom. That is why they say to use a thumb drive. That is why the virtual cd through ilo should work because it is also a usb device.

We were able to get CentOS 6 installed using the RHEL 6 drivers for the B320i. Thanks to all for your suggestions! :)

Re: Installing CentOS 6.3 to DL360e can't load driver for smart array controller

DPTSky — Tue, 31 Dec 2013 01:52:51 GMT

Just a FYI, this is how i did my install of CentOS 6.x on my HP DL360e G8.

On boot (USB,CD, Virtual Media) menu, i hit [tab] and added the following lines:

vnc dd=http://<ip>/driver/hpvsa.dd ip=10.x.x.x gateway=10.x.x.x netmask=255.255.255.0 dns=10.x.x.x

With that, i was able to get the driver downloaded from a web server, install via VNC (i find the ilo4 can be a bit laggy at times) and had success installing on several servers.

This required only having a single web server running for both ISO and driver.