https://community.hpe.com/t5/proliant-servers-ml-dl-sl/smartstart-5-20-keeps-dieing-while-setting-up-dl380-g1/m-p/2870909#M14008 trying to setup a DL380 with dual 933hz CPU, 2 GB Ram(2x512 and 1024) 4 36.7 GB 15k in 0-3 and 2 9.1 GB 10k Ultra 3 in 4 and 5. 4200 Controller<BR /><BR />Using 5.20 and after doing the Harware discovery and systen partion it reboots. When it comes backe up to the Smartstart screen it GPF's out on me. Always at the same spot...<BR /><BR />I setup a similar box with same speed cpus' but different memory (1GB) and same drive config but Ultra2 10k drives instead.<BR /><BR />No probs in that setup....problem lie in drives or memory perhaps?<BR /><BR />Any ideas? Fri, 27 Dec 2002 15:47:04 GMT Jeff Manning 2002-12-27T15:47:04Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/smartstart-5-20-keeps-dieing-while-setting-up-dl380-g1/m-p/2870909#M14008 trying to setup a DL380 with dual 933hz CPU, 2 GB Ram(2x512 and 1024) 4 36.7 GB 15k in 0-3 and 2 9.1 GB 10k Ultra 3 in 4 and 5. 4200 Controller<BR /><BR />Using 5.20 and after doing the Harware discovery and systen partion it reboots. When it comes backe up to the Smartstart screen it GPF's out on me. Always at the same spot...<BR /><BR />I setup a similar box with same speed cpus' but different memory (1GB) and same drive config but Ultra2 10k drives instead.<BR /><BR />No probs in that setup....problem lie in drives or memory perhaps?<BR /><BR />Any ideas? Fri, 27 Dec 2002 15:47:04 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/smartstart-5-20-keeps-dieing-while-setting-up-dl380-g1/m-p/2870909#M14008 Jeff Manning 2002-12-27T15:47:04Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/smartstart-5-20-keeps-dieing-while-setting-up-dl380-g1/m-p/2870910#M14009 Remove the 1024MB DIMM. This should resolve your problem. Fri, 27 Dec 2002 21:34:13 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/smartstart-5-20-keeps-dieing-while-setting-up-dl380-g1/m-p/2870910#M14009 Gary Logvin 2002-12-27T21:34:13Z