https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/hp-network-configuration-utility-ncu/m-p/991223#M140096 <P>I have made Fault tolerant network card by HP Network Configuration Utility (NCU)on PROLIANT DL380 G3 server using two HP NC7781 Network cards. <BR /> I try to update the drivers of Network card and NCU-- (NIC from 9.81.0.0 to 10.78.0.0 and NCU from 8.55.0.10 to 9.20.0.0) <BR /> first i started NCU but it gave error update miniport drivers first so i start updating NIC drivers it was ok but i lost network connectivity the through KVM i updated the NCU drivers it was also ok without error.<BR /> <BR /> After reboot nothing worked all network cards disabled and not possible to enable -- when trying to enable gives no error message but not getting enabled.<BR /> <BR /> no roll back possible for NIC total disaster trying to run NCU it gives error for XML file i dissolve the Teaming and run NIC in simple mode.<BR /> <BR /> Can any one help me how to recover from this and what could be the possible cause of this all OS was Win2003 server.</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved from ProLiant Servers - Netservers to ProLiant Servers (ML,DL,SL). -HP Forum Moderator</P> Fri, 03 Jan 2014 02:56:10 GMT Syed ali 2014-01-03T02:56:10Z https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/hp-network-configuration-utility-ncu/m-p/991223#M140096 <P>I have made Fault tolerant network card by HP Network Configuration Utility (NCU)on PROLIANT DL380 G3 server using two HP NC7781 Network cards. <BR /> I try to update the drivers of Network card and NCU-- (NIC from 9.81.0.0 to 10.78.0.0 and NCU from 8.55.0.10 to 9.20.0.0) <BR /> first i started NCU but it gave error update miniport drivers first so i start updating NIC drivers it was ok but i lost network connectivity the through KVM i updated the NCU drivers it was also ok without error.<BR /> <BR /> After reboot nothing worked all network cards disabled and not possible to enable -- when trying to enable gives no error message but not getting enabled.<BR /> <BR /> no roll back possible for NIC total disaster trying to run NCU it gives error for XML file i dissolve the Teaming and run NIC in simple mode.<BR /> <BR /> Can any one help me how to recover from this and what could be the possible cause of this all OS was Win2003 server.</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved from ProLiant Servers - Netservers to ProLiant Servers (ML,DL,SL). -HP Forum Moderator</P> Fri, 03 Jan 2014 02:56:10 GMT https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/hp-network-configuration-utility-ncu/m-p/991223#M140096 Syed ali 2014-01-03T02:56:10Z https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/hp-network-configuration-utility-ncu/m-p/6320333#M140097 <P>me too</P> Thu, 02 Jan 2014 07:53:41 GMT https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/hp-network-configuration-utility-ncu/m-p/6320333#M140097 erichost 2014-01-02T07:53:41Z