https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ml310-ide-raid-and-linux/m-p/2871126#M14022 I have 4 x 80Gb IDE drives installed and setup using Raid 1 in the raid controller bios. On boot the raid drives are listed as raid0, raid1.<BR /><BR />When trying to install linux (redhat 7.3 or 8.), I followed the instructions, from Compaq, about creating a driver disk and installing it, but when it comes to partitioning the system, linux only sees the 4 individual drives and not the 2 raid drives.<BR /><BR />How can I get linux to only see the raid devices? Fri, 27 Dec 2002 22:52:53 GMT Martin Glazer 2002-12-27T22:52:53Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ml310-ide-raid-and-linux/m-p/2871126#M14022 I have 4 x 80Gb IDE drives installed and setup using Raid 1 in the raid controller bios. On boot the raid drives are listed as raid0, raid1.<BR /><BR />When trying to install linux (redhat 7.3 or 8.), I followed the instructions, from Compaq, about creating a driver disk and installing it, but when it comes to partitioning the system, linux only sees the 4 individual drives and not the 2 raid drives.<BR /><BR />How can I get linux to only see the raid devices? Fri, 27 Dec 2002 22:52:53 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ml310-ide-raid-and-linux/m-p/2871126#M14022 Martin Glazer 2002-12-27T22:52:53Z