topic Re: CDRALW2K error on a BL 2p in ProLiant Servers (ML,DL,SL)

CDRALW2K error on a BL 2p

Michael Wright_2 — Sun, 05 Jan 2003 14:55:00 GMT

I am in the process of deploying these blades, and I want to get rid of this Event 7000 Service Control Manager error in the event log. Any suggestions would be appreciated.

Re: CDRALW2K error on a BL 2p

Eugeny Brychkov — Sun, 05 Jan 2003 15:18:45 GMT

Michael,
it is known problem. Please see article in Microsoft knowledge base http://support.microsoft.com/default.aspx?scid=KB;en-us;134425&
Eugeny

Re: CDRALW2K error on a BL 2p

Michael Wright_2 — Sun, 05 Jan 2003 21:09:05 GMT

The process is trying to start a CD ROM. The Blade servers have no CD ROM. I need to know how to disable the system from looking for a CD ROM.

Re: CDRALW2K error on a BL 2p

Eugeny Brychkov — Sun, 05 Jan 2003 21:50:33 GMT

Could you please post all messages (and all concerning messages) from the system event log? Is it starting service or driver? If service then you can go to PC management and 'disable' service on startup. If driver, then you may have any device identified as CDROM by the system. Find for which device (in device manager) and post it here also.
Reading MS KB I see that this file cdralw2k is a WMP (windows media player) file.
http://support.microsoft.com/default.aspx?scid=KB;en-us;269605&
http://support.microsoft.com/default.aspx?scid=KB;en-us;165863&
http://support.microsoft.com/default.aspx?scid=KB;en-us;317224&
So please uninstall / reinstall / install new WMP. Apply SP3. I saw articles stated that CD-RW software can cause these problems.
Eugeny

Re: CDRALW2K error on a BL 2p

Michael Wright_2 — Sun, 05 Jan 2003 22:02:23 GMT

The error comes from the SYSTEM event log.

Source: Service Control Mgr
Type: Error
EventID: 7000
Description:
The Cdrawlw2k service failed to start due to the following error. The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

Re: CDRALW2K error on a BL 2p

Eugeny Brychkov — Sun, 05 Jan 2003 22:10:18 GMT

Anyway, try playing with WMP and services in 'computer management'
Eugeny

Re: CDRALW2K error on a BL 2p

Michael Wright_2 — Sun, 05 Jan 2003 22:12:00 GMT

I just found the error. One of the other SA's installed WMP on the system that installs CD R/W software. I uninstalled WMP and the CD R/W software and the error went away. Thanks for pointing me in the right direction.

Re: CDRALW2K error on a BL 2p

Eugeny Brychkov — Sun, 05 Jan 2003 22:21:51 GMT

Michael - advice: please assign points to answers and people will be more happy to help you :o)
Eugeny

Re: CDRALW2K error on a BL 2p

Michael Wright_2 — Sun, 05 Jan 2003 22:37:52 GMT

I'm new to the board. Thanks again for the help.