topic Re: How to execute ROM Update Utility on ML370 G1? in ProLiant Servers (ML,DL,SL)

How to execute ROM Update Utility on ML370 G1?

Tom Cathers — Mon, 25 Aug 2014 04:33:28 GMT

I have a ML370 g1 with Ultra 3 disks that the SA5300 is calling out for firmware updates. How do I apply the latest firmware updates?

It seems to me that I must use the ROM Update Utility available on Smart Start 6.x but I can't boot this model from that can I? What is the alternative?

Thanks

P.S. This thread has been moved from Disk to ProLiant Servers (ML,DL,SL). - Hp forum Moderator

Re: How to execute ROM Update Utility on ML370 G1?

Rob Buxton — Wed, 05 Nov 2003 17:09:44 GMT

If you've downloaded the Softpaq, the next step is creating the 15 Floppy Disks!.
I believe that you can boot from the first, so just Boot the ML370 from that and then, hopefully, follow the instructions.

Re: How to execute ROM Update Utility on ML370 G1?

Tom Cathers — Wed, 05 Nov 2003 17:15:08 GMT

re: softpaq

I haven't seen a softpaq for disks distributed via HP's site, only from SS5.x and before. The only updates that I have seen lately are Offline Updates.

Reading between the lines, can I boot the first softpaq disk and then use my Offline Update disk? I hope that is more then a dream...