topic Re: ILO IP from Linux OS in ProLiant Servers (ML,DL,SL)

ILO IP from Linux OS

satyahc — Wed, 17 Dec 2014 07:27:06 GMT

Hi,

I have Hp servers with ILO. The server is loaded with Linux OS and connected to the deadnet which starts 10.x.x.x.

ILO is connected to the external network.

Some how i lost the IP of the ILO. But i can access the server using the deadnet IP using SSH.

Is it possible to extract the ILO IP using SSH console from the Server?

I am sure it should be possible.

Appreciate your response on this.

Thanks In advance,

satya

Re: ILO IP from Linux OS

kkpro — Wed, 17 Dec 2014 13:43:28 GMT

Hi,

You could use "HP iLO online configuration utility for Linux":

hponcfg -w conf.txt

-and then see xml config in conf.txt file.

Re: ILO IP from Linux OS

Jimmy Vance — Wed, 17 Dec 2014 15:03:07 GMT

if you have IPMI enabled on the host you can issue 'ipmitool lan print' This will give you the iLO IP. You can also use hponcfg which has already been suggested

Re: ILO IP from Linux OS

satyahc — Wed, 17 Dec 2014 16:35:23 GMT

Thanks for your quick response.

Should i install any rpm or is it bash scripts?

Can you help me to provide links on how can i proceed to use this script/utility?

Re: ILO IP from Linux OS

Jimmy Vance — Fri, 13 Nov 2020 05:37:07 GMT

'ipmitool' is included with most distributions, but may not be part of the standard installation.

'hponcfg' is a tool provided by HP. The latest version can be found here

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_5ab6295f49964f16a699064f29

Re: ILO IP from Linux OS

satyahc — Thu, 18 Dec 2014 19:40:23 GMT

Thanks a lot.

ipmitool is enabled in my server and i could able to extract the IP.

Thanks for the quick response & your support.

Re: ILO IP from Linux OS

vizio007 — Mon, 20 Feb 2017 14:04:37 GMT

This is the latest version 'hponcfg' link from hp.

http://downloads.linux.hpe.com/SDR/repo/spp/2016.10.0/hp/swpackages/hponcfg-4.6.0-0.x86_64.rpm

Re: ILO IP from Linux OS

molnart — Thu, 23 Dec 2021 22:38:07 GMT

I am too trying to find out my ILO ip address, tried both hponcfg and ipmitool, but the outputs below did not tell me anything.

also the routers dhcp interface does not show anything ilo related

<RIBCL VERSION="2.1"> <LOGIN USER_LOGIN="Administrator" PASSWORD="password"> <DIR_INFO MODE="write"> <MOD_DIR_CONFIG> <DIR_AUTHENTICATION_ENABLED VALUE = "N"/> <DIR_LOCAL_USER_ACCT VALUE = "Y"/> <DIR_SERVER_ADDRESS VALUE = ""/> <DIR_SERVER_PORT VALUE = "636"/> <DIR_OBJECT_DN VALUE = ""/> <DIR_OBJECT_PASSWORD VALUE = ""/> <DIR_USER_CONTEXT_1 VALUE = ""/> <DIR_USER_CONTEXT_2 VALUE = ""/> <DIR_USER_CONTEXT_3 VALUE = ""/> </MOD_DIR_CONFIG> </DIR_INFO> <RIB_INFO MODE="write"> <MOD_NETWORK_SETTINGS> <SPEED_AUTOSELECT VALUE = "Y"/> <NIC_SPEED VALUE = "10"/> <FULL_DUPLEX VALUE = "N"/> <IP_ADDRESS VALUE = "0.0.0.0"/> <SUBNET_MASK VALUE = "0.0.0.0"/> <GATEWAY_IP_ADDRESS VALUE = "0.0.0.0"/> <DNS_NAME VALUE = "server2"/> <PRIM_DNS_SERVER value = "192.168.50.1"/> <DHCP_ENABLE VALUE = "Y"/> <DOMAIN_NAME VALUE = "domain.local"/> <DHCP_GATEWAY VALUE = "Y"/> <DHCP_DNS_SERVER VALUE = "Y"/> <DHCP_STATIC_ROUTE VALUE = "Y"/> <DHCP_WINS_SERVER VALUE = "Y"/> <REG_WINS_SERVER VALUE = "Y"/> <PRIM_WINS_SERVER value = "0.0.0.0"/> <STATIC_ROUTE_1 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/> <STATIC_ROUTE_2 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/> <STATIC_ROUTE_3 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/> </MOD_NETWORK_SETTINGS> </RIB_INFO> <USER_INFO MODE="write"> <ADD_USER USER_NAME = "molnart" USER_LOGIN = "molnart" PASSWORD = "%user_password%"> <ADMIN_PRIV value = "Y"/> <REMOTE_CONS_PRIV value = "Y"/> <RESET_SERVER_PRIV value = "Y"/> <VIRTUAL_MEDIA_PRIV value = "Y"/> <CONFIG_ILO_PRIV value = "Y"/> </ADD_USER> </USER_INFO> </LOGIN> </RIBCL>

Set in Progress : Set Complete Auth Type Support : Auth Type Enable : Callback : : User : : Operator : : Admin : : OEM : IP Address Source : DHCP Address IP Address : 0.0.0.0 Subnet Mask : 0.0.0.0 MAC Address : 94:18:82:35:7e:4f SNMP Community String : BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled Default Gateway IP : 0.0.0.0 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3 Cipher Suite Priv Max : XuuaXXXXXXXXXXX : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM Bad Password Threshold : Not Available