ILO4 Fault on DL380 G8 Server

m.roshany — Sun, 18 Jan 2015 08:15:43 GMT

Hi,

Recently, while working with ILO4 on our operational DL 380 G8 server during a maintenance period, the server was suddenly rebooted and an ILO-related error was displayed on the screen, which pointed us to the diagnostics ILO page.

The fault seemed like a serious one, because the boot process had been stopped at that point. The diagnostics ILO page said this error: "Controller firmware revision 2.09.00 Could not partition embedded media device ". We cound not find a similar situation by google search. Anyway, after struggling with serveral reboots/poweroffs, the problem was resolved by pressing reset diagnostic button.

What's this error is all about? Can it be repeated in the futuer again? What should we do to prevent this from occuring again?

Thanks.

Re: ILO4 Fault on DL380 G8 Server

hpkasabbagh — Sun, 18 Jan 2015 15:58:11 GMT

Hello,

Check if you have the last ILO update version 2.03.

Sincerly,

topic ILO4 Fault on DL380 G8 Server in ProLiant Servers (ML,DL,SL)

ILO4 Fault on DL380 G8 Server

Re: ILO4 Fault on DL380 G8 Server