topic Re: How to enable PXE boot and grap MAC address from external 10Gb NIC card HP DL160 G9 in HPE ProLiant Servers (ML,DL,SL)

How to enable PXE boot and grap MAC address from external 10Gb NIC card HP DL160 G9

Simpat — Thu, 15 Jan 2015 04:25:45 GMT

How to enable PXE boot and grap MAC address from external 10Gb NIC card HP DL160 G9

Dear ProLiant Scripting Experts

I received more than 300 hundreds of ProLiant DL160 Gen9 servers with additional NIC model HP Etherneet 10Gb 2-port 530T Adapter CNA. We working on PXE network boot environment. So, we need to enable PXE and collect MAC for setup DHCP.

I'm now using some python script and PowerShell such as Get-HPiLONICInfo. unfortunately, it return only embed NIC.

If I go to enable PXE boot in BIOS and collect MAC address manully, it would take me serveral months to complete this task.

I need help on how to scripting on:

- Enable PXE boot on external HP Etherneet 10Gb 2-port 530T Adapter - CNA (IPv4).
- Collecting MAC Addresses of External NIC.

Any help would be very appreciate.

Re: How to enable PXE boot and grap MAC address from external 10Gb NIC card HP DL160 G9

hpkasabbagh — Sun, 18 Jan 2015 03:05:28 GMT

Hello,

You could show NIC Interface: show /system1/network1/Integrated_NICs. Don't use ILO Mac Address as target.

Change the boot order: /system1/bootconfig1/bootsource3.

Don't forget to enable PXE on RBSU.

Sincerly,

Re: How to enable PXE boot and grap MAC address from external 10Gb NIC card HP DL160 G9

Simpat — Mon, 19 Jan 2015 12:46:14 GMT

Hi hpkasabbagh

Many on your advice., but I did not want to collect MAC address from Integrated_NICs, I want to collect from additional NICs instead.

I can change boot order to get PXE boot from external NIC by this HPiLO PowerShell :

Set-HPiLOPersistentBootOrder -BootOrder Boot000C, Boot0008, Boot0009, Boot000B

Unfortunately, Since iLO unable to show information from NIC on external PCI slot, the painful is I cannot get external NIC card with PXE enabled on RSBU by command line.

I tried both Python and PowerShell and got the same result from API.

I am still lost in space how to manage this external NIC, Do you have any other idea?

Best Regards,

Job

Re: How to enable PXE boot and grap MAC address from external 10Gb NIC card HP DL160 G9

hpkasabbagh — Tue, 20 Jan 2015 00:38:38 GMT

Hi Simpat,

- Begin to show all boot devices available:

show -all /system1/bootconfig1

- If you see your additional NIC displayed, change the boot ranking remplacing "n" with your NIC ID and "num" by 1:

set /system1/bootconfig1/oemhp_uefibootsource<n> bootorder=<num>

Sincerly,

Re: How to enable PXE boot and grap MAC address from external 10Gb NIC card HP DL160 G9

Simpat — Tue, 20 Jan 2015 12:07:12 GMT

Hi hpkasabbagh

Thank you for the example command. This can be helpful for people who want to send command directly to iLO via SSH.

<hpiLO> show -all /system1/bootconfig1

/system1/bootconfig1/oemhp_uefibootsource1
  Targets
  Properties
    bootorder=1
    oemhp_description=Slot 1 Port 1 : HP Ethernet 10Gb 2-port 530T Adapter - CNA (IPv4)

Actually, set /system1/bootconfig1 it is the same as my PowerShell cmdlet I have already used.

set /system1/bootconfig1/oemhp_uefibootsource<n> bootorder=<num>

Same as :

Set-HPiLOPersistentBootOrder -BootOrder Boot000C, Boot0008, Boot0009, Boot000B

Once I did appled BootOrder changed, it already enabled PXE boot automatically.

Anyway, as you can see above command show -all /system1 it still cannot show MAC Address from external NIC card. Do you have more solution for this?

Yours Hopefully

Re: How to enable PXE boot and grap MAC address from external 10Gb NIC card HP DL160 G9

hpkasabbagh — Thu, 22 Jan 2015 21:45:34 GMT

Hello,

If you try with 'GET_EMBEDDED_HEALTH_DATA' you can show all server components informations. Use ('NIC'): filter to show MAC address.

I don't understant why you need to show MAC address while DHCP server does the trick?

Sincerly,

Re: How to enable PXE boot and grap MAC address from external 10Gb NIC card HP DL160 G9

Simpat — Fri, 23 Jan 2015 09:08:31 GMT

Hi hpkasabbagh,

I found all data I need from GET_EMBEDDED_HEALTH_DATA but it show external NIC Mac address only when it have OS deployed. However, many thanks for this API, it pretty useful.

I can get MAC addresses from switches and DHCP, but it did not show MAC corresponding to Hostname, or Serial Number.

I need to do some manual switch port ID mapping MAC address with the excel sheet from installation guys for now.

Many Thanks, I apprecitaed your advice.

Re: How to enable PXE boot and grap MAC address from external 10Gb NIC card HP DL160 G9

hpkasabbagh — Fri, 23 Jan 2015 15:21:29 GMT

Hello,

No problem. You are welcome.

Sincerly,