ILO 4 Error on Remote Support

Davide Depaoli_3 — Mon, 16 Feb 2015 12:49:43 GMT

Hello,

I'm setting up ILO4 (advanced license) on two DL380Gen9. Customer bought Proactive support and I want to configure Remote Support inside ILO, but I get the following error:

Protocol error occurred while communicating with the HP Insight Remote Support receiver.Please retry. (No server certificate).

Does anyone can help ?

thanks in advance

regards

Davide

Re: ILO 4 Error on Remote Support

Suman_1978 — Wed, 18 Feb 2015 09:41:36 GMT

Hello,

May be you need to do this:

Configuring the RIBCL protocol
HP recommends configuring the RIBCL protocol before registering an HP ProLiant server for Insight RS.
To configure the RIBCL protocol:
1. Log in to the Insight RS Console (https://<Insight RS Hosting Device IP address or FQDN>:7906).
2. From the main menu, select Discovery, and then click the Credentials tab.
3. From the Select and Configure Protocol list, select iLO Remote Insight Board Command Language Protocol (RIBCL), and then click New.
4. Enter the user name and password of an iLO user account on the HP ProLiant server you want to register for Insight Remote Support.
5. Click Add.

For more info, read these guides:

http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03508827

Using Insight Remote Support with HP Proactive Care service (Page 122)

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03334051-11.pdf

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

topic ILO 4 Error on Remote Support in ProLiant Servers (ML,DL,SL)

ILO 4 Error on Remote Support

Re: ILO 4 Error on Remote Support