topic Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure? in ProLiant Servers (ML,DL,SL)

[ ProLiant ML350 G5 ] Smart Array E200i battery failure?

MelvinN — Mon, 02 Aug 2010 06:00:32 GMT

Hello,

We have a ProLiant ML350 G5 server which gave me the notice to replace the battery of the E200i controller?

Where can I get such battery? En which one do I need?

Thanks in advance!

Yours sincerly,

Melvin

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

WFHC-WI — Mon, 02 Aug 2010 14:29:27 GMT

hi Melvin,

You need this battery:

HP part number: 307132-001

Description: Battery : 3.6V battery pack assembly - 500mAh nickel metal hydride (NiMH) - Oval shaped, 12.5mm (0.5in) high, 38mm (1.5in) wide, and 77mm (3.0in) long

good luck... er, bonne chance. If you appreciate the answers, we appreciate the points!

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

MelvinN — Tue, 03 Aug 2010 07:53:27 GMT

Hi WFH-WI,

Thanks for your reply!

After replacing the battery do i have to do something else? Like re-configure the raid array or something like that?

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

Nikliz — Tue, 03 Aug 2010 14:18:25 GMT

I would've recommend to verify the Firmware on your controller and if it's out of date to upgrade it to the latest version and wait for at least 72hrs and re run the ADU. But, if you keep having the error msg after that to go ahead and replace the battery. After that you don't need to make any other changes.

Cheers!
FYI:Also verify how many batteries you'r controller is currently supporting :D

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

WFHC-WI — Fri, 06 Aug 2010 16:46:05 GMT

Nikliz is right, no need to reconfigure your array or do any other actions once you have replaced this battery.

Easy as it gets!

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

MelvinN — Thu, 12 Aug 2010 11:08:03 GMT

Thanks! The firmware is v1.20... very old, i guess.

But I don't think it says "replace battery" without reason. If I don't replace the battery... what will happen?

And how exactly do i replace the battery?

I'm a servernewb... sorry.

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

Saberus — Thu, 12 Aug 2010 17:32:59 GMT

If you don't replace the battery, it may not have enough charge to support the cache if there's a power failure. If the system detects the battery is dead, it may disable the cache altogether until the charge level comes back up, this can have a severe impact on your I/O rates.

I agree with the rest, verify your firmware is up to date first, sometimes the new firmware has better verification/management on charging the battery. remember to wait 72 hours to give the system enough time to trickle-charge the battery.

If you do have to replace the battery, it will be connected to the cache module with a few easy to release clips. Just power down the server (properly of course), remove the cache module from the system, and swap out the batteries. It can take up to 72 hours for the battery to get back to full charge.

If you like, HP offers a page where you can view most server models, and how to replace/remove many parts in them at http://h20464.www2.hp.com/index.html

Here's a direct link to the process to get the cache module out: http://h20464.www2.hp.com/results.htm?SID=1121586&MEID=8B57711E-5E25-479C-9F6A-BE5916307139

Hope this helps.

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

Proliant Watch — Fri, 13 Aug 2010 00:17:21 GMT

307132-001 - 3.6V battery pack assembly - 500mAh nickel metal hydride (NiMH) - Oval shaped, 12.5mm (0.5in) high, 38mm (1.5in) wide, and 77mm (3.0in) long B -N/A- Modified

413486-001 - 128MB battery-backed write cache (BBWC) module - 40-bit - Does not include the battery assembly - For Smart Array E200/64 controller

Those are the 2 batteries used with e200 controller. Also check for the spare part no on the battery in your server.

For the purchase and the pricing details of the HP Proliant parts, please call the Pre-Sales at 1-800-888-5858 Or you can call HP Parts Store at 1-800-227-8164 to order by phone.

Regards,
http://hpproliant.blogspot.com/

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

MelvinN — Mon, 23 Aug 2010 07:32:32 GMT

Thanks!

It can't go wrong with this information... great! :)

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

JaceM — Mon, 02 May 2011 14:24:18 GMT

I noticed that there are two bateries. How can I determine which one is bad?

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

Johan Guldmyr — Mon, 02 May 2011 19:36:41 GMT

Jade: I think there are more than one battery cell inside the battery pack and that one of them is faulty. You replace the whole battery pack (one spare part). I would not advise you to try to replace individual cells inside there, unless you know what you're doing.

Or do you actually have two battery packs connected to the controller?

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

JaceM — Mon, 02 May 2011 19:40:48 GMT

1 pack. Thanks!!

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

bgarlock — Tue, 20 Dec 2011 16:22:02 GMT

Hello,

I am having the same error, so I am going to order part #307132-001. The links to the "Self Help" show how to remove the cache memory SIMM/DIMM, but don't show how to replace the battery. Will this be a "common sense" replacement once I get the battery? I've searched HP's Web site for any documentation on replacing the BBWC Battery, but can only find replacing the entire memory module.

Many thanks,

Bruce

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

Richardc0077 — Fri, 11 Oct 2013 10:19:57 GMT

Hi All

i am also a newbe to the server club and also have a problem with the battery pack. i ahve found some top ideas about this subject in the above but i can give you my 10 cents worth the battery pack comes of very easly but mack sure the when you replace it with the new one check the 2 clips at the botom of the board have locked in. don't forget to follow static precautions and earth your self.

Richard C

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

DarthVal — Tue, 21 Jan 2014 20:30:40 GMT

I am just wondering - would it be easiest to just replace the whole battery-backed write cache? If so, do I need to rebuild the array after or will there be any configuration involved?

I know very little about server hardware management.

Thanks.

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

Robert Klarmann — Wed, 22 Jan 2014 11:32:52 GMT

Hello,

no - you have to replace only the battery module - it is clipped behind the cache module. It is easy to remove from the cache module. After clipping in the new battery you put the cache module back in place on the controller - close the server and power it up.

If you have too much money to spend you can also replace the complete BBWC module with battery :-) but as said befor - you should not ;-)

The battery will be charged and the controller will then reenable the write cache. That's all - no need to change config or array settings.

Regards

Robert

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

DarthVal — Wed, 22 Jan 2014 16:38:22 GMT

Thanks, Robert. This will be much easier, since I am having difficulty determining exactly which part # I would need for the cache. :)

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

DarthVal — Mon, 27 Jan 2014 14:09:54 GMT

Okay, I have replaced the battery, rebooted the server and waiting a few days to see if that battery just needed to charge.

I am still getting the same message.

Do I need to reboot again to be able to see that the battery has been charged? Is there something else that I need to do to get it to recognize the new battery?

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

DarthVal — Tue, 25 Feb 2014 19:24:05 GMT

I have replaced both the battery and battery backed cache card. I have installed the latest firmware.

I am still getting this error message.

Any ideas on what else to try?

Re: [ ProLiant ML350 G5 ] Smart Array E200i battery failure?

VelocityTracy — Tue, 25 Feb 2014 22:56:12 GMT

413486-001 is a part number for 128mb cache. but of course there are other sizes. im unsure what you're using.