topic Re: DL 560 G8 restart twice in ProLiant Servers (ML,DL,SL)

DL 560 G8 restart twice

DoDstm — Mon, 09 Feb 2015 18:01:12 GMT

One of our client bought DL 560 G8 (part number 686792-B21)

He has one P420I embedded smart array controller, 4 HP Disks ( Two HP 120 GB 2.5" Internal Solid State drive and two HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive)

The client did not want any array configuration. So I have 4 arrays (each one with on disk)

SO=Windows server 2012 R2 Std

I have already applied the SPP 2014.09. Insight Manager does not report any error.

Sometimes, completely random, when I restart/start the server, he make 2 reboots. In the first, when the windows symbol appears, he restarts again. The second one is definitive. Windows system is loaded.

Can I have some help?

Best Regards

Re: DL 560 G8 restart twice

Suman_1978 — Tue, 10 Feb 2015 04:08:46 GMT

Hi,

Check the Windows Event Logs for any symptoms.

Check the IML from iLO4.

Obtain AHS Report/Logs and log a support case with HP.

https://www.youtube.com/watch?v=GvSAffkqz30

Thank You!
I am a HP employee.

Useful Links for ProLiant Servers

Re: DL 560 G8 restart twice

SteveWolsefer — Thu, 14 May 2015 01:10:02 GMT

Have you found a solution for this? I have a customer with the same model server and controller, but their are three sas drives in a raid 5 configure. They are having a very similar issue. Occasionally, on a reboot or power on, the system will show the windows splash screen and reboot. Other times it will boot fine.

Thanks,

Steve Wolsefer

Fuller Computer Solutions

@DoDstm wrote:
One of our client bought DL 560 G8 (part number 686792-B21)

He has one P420I embedded smart array controller, 4 HP Disks ( Two HP 120 GB 2.5" Internal Solid State drive and two HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive)

The client did not want any array configuration. So I have 4 arrays (each one with on disk)

SO=Windows server 2012 R2 Std

I have already applied the SPP 2014.09. Insight Manager does not report any error.

Sometimes, completely random, when I restart/start the server, he make 2 reboots. In the first, when the windows symbol appears, he restarts again. The second one is definitive. Windows system is loaded.

Can I have some help?

Best Regards

Re: DL 560 G8 restart twice

DoDstm — Thu, 14 May 2015 21:44:57 GMT

Hi Steve

I opened a Hp's incident.

It's not a direct HP problem, but a Microsoft one

Title: HP ProLiant ML310e/ML350e/DL320e/DL360e Gen8 Server - Windows 8.1 or Windows Server 2012 R2 System Does Not Restart After Update Rollup 2919355 is Installed

Even rebooting twice, If server starts without problems, then:

1. Download KB2966870

2. Install It

3. Restart the server.

In my case, It works

I hope a can help.

Best regards eand sorry for my bad english.

Re: DL 560 G8 restart twice

SteveWolsefer — Sun, 17 May 2015 21:06:10 GMT

Dodstm,

Thank you for your response. Your English is great. After your reply, I found that KB, and wondered if it was relative to my situation. But, unfortunately, this server only had Server 2012.

For anyone in the future looking at a similar issue. Here are the details.

DL 560 Gen 8 OS - Server 2012 running 4 E5-4610V2 Processors 32 gig Ram. Latest drivers and firmware. Issue was on restart there would be random reboots once windows splash screen appeared. Sometimes it would boot no problem, sometimes it would take two or three boots to get into windows. Once in windows, system operated normally.

Replaced system board. Did not work. System worked no problem with only two processors installed and 16 gigs of ram. Replaced two cpus and 2 Memory Dimms. Did not work.

Started working with HP Level 2. Tried multiple things, The final solution for now was to roll ILO firmware from 2.10 to 1.20. After this was done, Rebooted many times. No issues. Waiting for fix in ILO firmware.

Steve Wolsefer
Fuller Computer Solutions

Cincinnati, OH

Re: DL 560 G8 restart twice

Server-Support — Mon, 18 May 2015 00:03:01 GMT

Whoa, so it is a Windows Server OS update issue then ?

Thanks for sharing with us here, I'll skip that update.