topic Drive size not detected with P410 controller. in HPE ProLiant Servers (ML,DL,SL)

Drive size not detected with P410 controller.

Stephen Picardi — Fri, 19 Jun 2015 14:24:26 GMT

I am upgrading an ML330 G6 from 4 300GBSAS drives to 4 4TB SAS drives.

The controller sees the drives but states the size as zero.

I've tried to install (what I thinkis) the latest firmware for the P410 but I tells me I have the latest version. It's currently version 3.0

A diagnostics report tells me this verion of the firmware does not support the drives but I cannot find a later version. Any suggestions?

Re: Drive size not detected with P410 controller.

Suman_1978 — Thu, 25 Jun 2015 03:40:24 GMT

Hi,

P410 may not support 4TB SAS Drives. Please refer to the QuickSpecs.

The latest firmware version is some where around 6.x, see this link and choose the operating system.

http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=3883933

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

Self Solve Options for ProLiant Servers