topic Re: ProLiant DL380 Gen9 - NIC Teaming in ProLiant Servers (ML,DL,SL)

ProLiant DL380 Gen9 - NIC Teaming

Sandndan — Mon, 24 Nov 2014 14:33:18 GMT

Hi community,

since one week we have new DL380 Gen9 servers. Now we want to install them as a Win 2008 R2 server, but we cannot create a NIC teaming.

If I install the HP NCO (Network Configuration Utility), cp023339.exe Version 10.90, I get

"The software will bot be installed on the system because the required hardware is not present in the system or the software/firmware doesn't apply to the system"

I updated driver / firmware of the NIC, searched any new HP Network Configuration Tools, nothing.

NIC: HP Ethernet 1GB 4-port 331i Adapter

Can someone help?

Many thanks

/Hugo

Re: ProLiant DL380 Gen9 - NIC Teaming

Renjiv — Mon, 24 Nov 2014 18:58:46 GMT

Greetings!

HP Network Configuration Utility (NCU) does not support some of the New NICs released with Gen9. When installing Windows 2008 R2 on gen9 server and configuring network team, we could not use NCU as it is not supported.

As a workaround, you can use Broadcom Advance Control Suite 4 (this is 3rd party)

Step by step methods to configure teaming using Broadcom Advance Control Suite 4 is below:

Step1:

Download Broadcom Advance Control Suite 4 from below link :

http://www.broadcom.com/support/ethernet_nic/netxtreme_server.php

Note: This will be under “Windows Management Applications” section on above link and download 64 (x64) bit version.

Step2: Extract downloaded .zip file and run “setup.exe” from extracted content.

Step3: Follow On-Screen instructions to complete installation.

You can access “Broadcom Advanced Control Suite 4” (BACS) various ways:

From Start Menu, it will be listed under Broadcom.

go to the C:\Program Files\Broadcom\BACS folder and launch it

Or go to Control Panel and launch BACS 4 from there. Or you can try launching System Tray as well.

Step4: Once BACS utility is launched, select the Network Card, you could confirm current drivers, firmware details.

Step5: To configure teaming, from the drop down menu choose “TEAM VIEW” and configure.

Regards,
Renji V

Re: ProLiant DL380 Gen9 - NIC Teaming

Sandndan — Fri, 28 Nov 2014 12:27:33 GMT

Thanks,

our key account manager told us the same. NCU is not supported anymore, because Windows 2012 is doing teaming and so on itselfes.

BACS is ok for 2008R2. You can use CLI and predefined teaming profiles too.

see BACScli.exe

Thanks a lot.

Re: ProLiant DL380 Gen9 - NIC Teaming

LAT15 — Fri, 08 May 2015 15:08:39 GMT

Gen9 DL360

HP Service Pack for ProLiant

2015.04.0
9 Apr 2015

Nic driver:

Name: b57nd60a

Version: 16.6.0.1

Broadcom Suite

Name: BACS4

Version: 17.0.3.0

NIC Teaming Issue

These stepsdo not work on our servers.

The BACS software starts but there are no options for creating a team from any view or menu.

Re: ProLiant DL380 Gen9 - NIC Teaming

tokenathlete — Wed, 13 May 2015 17:21:34 GMT

@Sandndan wrote:
Hi community,

since one week we have new DL380 Gen9 servers. Now we want to install them as a Win 2008 R2 server, but we cannot create a NIC teaming.

If I install the HP NCO (Network Configuration Utility), cp023339.exe Version 10.90, I get

"The software will bot be installed on the system because the required hardware is not present in the system or the software/firmware doesn't apply to the system"

I updated driver / firmware of the NIC, searched any new HP Network Configuration Tools, nothing.

NIC: HP Ethernet 1GB 4-port 331i Adapter

Can someone help?

Many thanks
/Hugo

Pretty crappy to not support the NICs that are included on the server with the NCU! I'm becoming disillusioned with HP.

Re: ProLiant DL380 Gen9 - NIC Teaming

Jimmy Vance — Wed, 13 May 2015 17:51:33 GMT

This looks like it might help

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=mmr_kc-0123456&sp4ts.oid=7252836

Re: ProLiant DL380 Gen9 - NIC Teaming

nicolasmonaco — Tue, 26 May 2015 11:00:17 GMT

Hello renji,

broadcom control suite 4 is not avaialble on the website

do you have another way to fix this probléme ?

BEST

NICO

Re: ProLiant DL380 Gen9 - NIC Teaming

Andrew Wolgamott — Fri, 11 Nov 2022 10:23:48 GMT

I opened a case with HP and here's the response and SOLUTION:

We would like to inform you that initially, with the release of Gen9 servers, NCU support for HP ProLiant Gen8 Servers was declared as End-of-Life (EOL) and would no longer be supported on HP ProLiant Gen9 Servers.However, with the update released on 04/20/2015, support for HP Ethernet 1Gb 4-port 331i and HP FlexFabric 10G 2-port 536FLB Adapter has been added to HP NCU.

The latest release of HP NCU (cp026060.exe) supporting HP Ethernet 1Gb 4-port 331i Adapters is available on the following FTP site: ~~ftp://ftp.hp.com/pub/softlib2/software1/sc-windows/p1165903540/v106160~~

Please refer to the below document for reference.

~~http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04539182~~
[Moderator note: Removed the broken link. Please refer to https://support.hpe.com/ ]

Re: ProLiant DL380 Gen9 - NIC Teaming

FaizalSalih — Thu, 23 Jul 2015 11:17:19 GMT

No teaming utility from HP

But we can use windows teaming utility Win2012 server

Go to server manager /local server /nic teaming enable

select the nic to be teamed

Right click Add to new Team

Name the new team

In the advanced properties/ teaming mode to switchindependent.

Thats IT

Re: ProLiant DL380 Gen9 - NIC Teaming

KammererMakSim — Fri, 24 Jul 2015 16:08:20 GMT

Hello !

I have HP DL360 Gen9. And i install Windows Server 2008 R2. And i needed network team.

But HP NCU for W2k8 R2 not working on HP DL360 Gen9. And what ? And all :-)

I see this post, try install Broadcom Advanced Control Suite 4, but nothing - i do not see filter "Team".

I try run from Control Panel like Administrator - nothing.

4 reboot server - nothing.

And now i find new, fresh and working version Advanced Control Suite 4 - http://www.necacom.net/index.php/broadcom/netlink/9069-broadcom-management-applications-installer-17-0-5-2

I install it and magic, i see filter "Team" and i create team.

Welcome !

Re: ProLiant DL380 Gen9 - NIC Teaming

Marcello_Modica — Thu, 20 Aug 2015 07:17:45 GMT

I find this link too for bacs 4. My system is Windows 2008 r2 and NCU 10.90 always crash.....i will try BACS 4 from this link and update this post.

Re: ProLiant DL380 Gen9 - NIC Teaming

DRP-HSPP — Tue, 25 Aug 2015 20:09:24 GMT

@Andrew Wolgamott wrote:
I opened a case with HP and here's the response and SOLUTION:
...
The latest release of HP NCU (cp026060.exe) supporting HP Ethernet 1Gb 4-port 331i Adapters is available on the following FTP site: ftp://ftp.hp.com/pub/softlib2/software1/sc-windows/p1165903540/v106160

This solution worked for me. The current version of the HP NCU allowed me to quickly team the NICs.

Re: ProLiant DL380 Gen9 - NIC Teaming

J_Joshi — Fri, 13 Nov 2015 16:22:56 GMT

The latest release of HP NCU (cp026060.exe) supports HP Ethernet 1Gb 4-port 331i Adapters and HP FlexFabric 10G 2-port 536FLB Adapters and is available on the following FTP site:

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04539182

Re: ProLiant DL380 Gen9 - NIC Teaming

Alberi — Mon, 07 Mar 2016 16:22:19 GMT

ProLiant DL360 Gen9

This solution worked for me.

Thank you.

Re: ProLiant DL380 Gen9 - NIC Teaming

MrSmiles — Sat, 09 Apr 2016 03:07:28 GMT

How to upgrade firmware for our server (DL380 Gen9) .

Please let me know step by step..

Thanks !